Loading ...
Loading ...
Loading ...
BLENDING IN THE 40 OUNCE
(1.2L)CONTAINER
1. To begin, put a seal onto the bottom thread of the blade
base. The seal should fit snugly and evenly around the thread.
WARNING
Parts will become hot with extended use.
DO NOT touch the drive socket in the underside of the blade base or the drive spline
inside the motor base.
When blending hot liquids in the 40 ounce (1.2 L) container, escaping
steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug securely in place prior to blending hot
liquids in the 40 ounce (1.2 L) container.
Rotating blades can cause severe injury.
DO NOT reach into container while machine is running.
To avoid damage or personal injury, DO NOT use the 40 ounce (1.2 L)
container (including the blade base, seal, lid and lid plug) in the microwave.
SCALE 1.000
Seal
Blade Base
2. Thread the blade base onto the 40 ounce (1.2 L) container
in a clockwise direction just until tight. Do not overtighten
or leaking can occur.
10
Liquids (water, juice, yogurt)
Fruits and Veggies
Leafy Greens
Ice and Frozen Ingredients
Dry Goods (grains, seasonings, powders)
40 ounce (1.2 L)
Container
3. Load the 40 ounce (1.2 L) container according to
the recipe.
4. Put the lid onto the 40 ounce (1.2 L) container.
Make sure that the tabs on the lid snap onto
the container.
5. Insert the lid plug into the opening in the lid.
Turn the lid plug counterclockwise to lock.
Pull up on the lid plug to make sure it is secure.
6. Set the 40 ounce (1.2 L) container onto the
motor base with the container handle facing you.
This icon corresponds to suggested recipes for the 40 ounce (1.2 L) container in your cookbook.
Blade Base
The interlock tabs on the 40 ounce (1.2 L) container will lower into the cutouts in the motor base.
7. Begin blending by slowly rotating the control to the desired program, variable speed setting or to pulse.
Once you are at the setting you would like to start blending on, push the knob in to start the blades.
Follow the recipe guidelines to finish the blend.
8. Wait until the blades come to a complete stop before removing the lid or the container from the
motor base.
9. Empty the container. Unthread the blade base from the container in a counter-clockwise direction.
Loading ...
Loading ...
Loading ...