Loading ...
Loading ...
Loading ...
8
INITIAL INSTALLATION
4. Loosen all four preassembled mounting bracket
screws (Q), then completely remove the two
mounting bracket screws (Q) from the round holes
of canopy (D). Set aside for later use.
Detach mounting bracket (E) from canopy (D).
5. Attach mounting bracket (E) to outlet box (not
included) using screws and washers provided with
the outlet box.
CAUTION: It is very important you use the proper
hardware when installing the mounting bracket (E) as
this will support the fan.
6. Remove all ten preassembled motor screws (O)
and ve preassembled plastic motor blocks from the
underside of the motor assembly (G). Discard the
motor blocks, but keep the motor screws (O) for later.
For Standard or Angle Mounting Instructions, continue
to page 9. For Closemount Instructions, proceed to
page 11.
G
5
6
4
D
E
Q
E
E
O
Standard or
Closemount
Mounting
Angled
Mounting
Motor
Block
Loading ...
Loading ...
Loading ...