Loading ...
Loading ...
Loading ...
INSERTING THE GLASS JUG
• Check that the speed selector dial is set to ‘0’ off.
• Place the jug assembly onto the motor unit, ensuring it is seated correctly.
OPERATING THE BLENDER
• Place the ingredients you wish to blend into the glass jug.
• Fit the lid onto the jug, aligning the small round tab with the handle and large round tab with
the pouring spout. Press down rmly.
• Insert the measuring cap into the opening of the lid, and press down rmly.
• Place your hand on top of the blender jug lid to hold the jug steady. Switch the motor unit on
to the desired speed or pulse setting using the speed selector dial.
NOTE: Always place your hand on top of the blender jug lid to hold the jug steady when you are
operating the device.
SPEED SELECTOR DIAL
‘1’ Position - For light usage with liquids
‘2’ Position - For more solid consistency (E.g. mixing liquids and solid foodstuffs)
‘P’ Position - For ice crushing & short pulses at high speed.
NOTE: You have to turn the ‘P’ pulse switch repeatedly
‘0’ Position - Off.
USEFUL TIPS
• When pureeing solid ingredients, place and blend small portions at a time, gradually adding
more ingredients.
• When processing solid ingredients, cut them into small pieces (2-3cm) rst.
• When blending liquids into solid ingredients, start off rst with a small amount of liquid,
gradually adding more liquid through the lid opening.
• Always place your hand on top of the blender jug lid to hold the jug steady when you are
operating the appliance.
• For stirring solid or very thick liquid ingredients it is recommended that you use the blender
set to ‘P’ pulse setting mode to prevent the blades from becoming stuck.
AFTER USE
• Turn the speed selector dial to the ‘0’ off position and wait until the blades stop moving.
• Switch the power off and remove the plug from the wall power outlet.
• Lift the glass jug up to remove it from the motor unit.
Loading ...
Loading ...
Loading ...