Loading ...
Loading ...
Loading ...
Customer service en
11
4Customer service
Cu s t o mer ser vi ce
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories
(not included in the scope of delivery)
Note: These instructions apply to several appliance
models. It may be the case that an optional accessory
that is listed does not apply for your appliance.
Note: Observe the installation instructions in the
accessory.
--------
--------
E no. FD no.
After-sales serviceO
GB 0344 892 8989
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak.
Off peak 0.0088 € per minute.
Accessory - narrow 260 mm Order number
Starter set for air recirculation mode
Easy-change filter for starter set
Z5105X5
Z5101X1
CleanAir recirculation module
Easy-change filter for CleanAir recirculation
module (cannot be regenerated)
Z5280X0
Z5170X1
Easy-change filter for CleanAir recirculation
module (can be regenerated)
Z50XXP0X0
Accessory - wide 345 mm Order number
Starter set for air recirculation mode
Easy-change filter for starter set
Z5106X5
Z5102X1
CleanAir recirculation module
Easy-change filter for CleanAir recirculation
module (cannot be regenerated)
Z5286X0
Z5170X1
Easy-change filter for CleanAir recirculation
module (can be regenerated)
Z50XXP0X0
Loading ...
Loading ...
Loading ...