Loading ...
Loading ...
Loading ...
Before Installation
129
Installation and Maintenance Installation
■ Install Facing in the Correct Direction
When installing the projector facing upward or downward, specify which way the projector
is facing in [Install settings] > [Professional settings] > [Vertical projection]. (P152)
10° 10°
10° 10°
10°
10°
The projector can be installed facing any direction*
1
, as shown
below. However, projection upward ( ) or downward ( ) may
shorten the useful life of the lamp. Installation in these orientations
also requires projector settings adjustment. Specifically, for upward
or downward projection, refer to instructions for [Vertical projection]
(P152) in the [Install settings] menu.
*1 No optional accessories are available for installing the projector in
ways other than ceiling installation (P39, P132, P305).
*2 Failure to do so may damage the lamp.
Upward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.*
2
Downward
projection:
Inclination of the
projector should
be no more than
10° from the
vertical axis.
*
2
If installing the
projector on the floor
or hanging from the
ceiling, the left / right
inclination of the
projector should be no
more than 10°.*
2
Do not use the
projector standing
on its side.
This may
damage the lamp.
Loading ...
Loading ...
Loading ...