Loading ...
Loading ...
Loading ...
7
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or
dangling.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevents
overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the
appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 72º and
78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate.
When the unit is first turned on, allow it to operate for about an hour to cool the interior before placing
items inside.
SETTING THE TEMPERATURE CONTROL
The control panel is located below the doors, in the center of the kick plate. Under normal operation, the
LED display shows the internal temperature of the cabinet. The operating range of the beverage
merchandiser is set at the factory at 2°C to 6°C (36°F to 43°F), but if you wish to change this, or if you
have any other questions regarding the operation of this unit, please call our Customer Service
Department at 1-800-932-4267 (9:00AM to 5:00PM ET).
To set the operating temperature, press the key for 3 seconds to enter the user menu; the code St is
displayed. Then press the key again to display the current value of the set temperature. This can be
modified by pressing either key or . Once the desired set temperature is displayed, press the Set
key to confirm and save it. Alternatively, if no key is pressed within 30 seconds, the value will be saved
automatically.
To switch the temperature display between Celsius and Fahrenheit, press the key for 10 seconds; the
code H0 is displayed. Continue to press the key until H7 is displayed, then press the key to make
the switch. If no key is pressed within 30 seconds, no change is made.
NOTE: You may find that it is necessary to reset the operating temperature once this change is made.
Control panel
Loading ...
Loading ...
Loading ...