Loading ...
Loading ...
Loading ...
OMEGA ALTISE
CONTROLS & OPERATION
CONTROL PANEL:
The control panel is at the fan base. Four buttons are used to control the
appliance functions, with indicators around the outside. These buttons
are repeated on the remote control (except there is a separate off button
on the remote control. The remote control uses 2 AAA batteries (not
included).
ON/OFF/SPEED:
Pressing this button once starts the fan running at low. Pressing the
button will cycle the speed through Low/Medium/High and then Off
(using the remote control will cycle through Low/Medium/High, with Off
being a separate button). Three indicators at the bottom of the control
panel show which speed has been selected (if the appliance is turned off, all 3 indicators are off).
MODE:
The appliance has 3 fan modes. Pressing the Mode button cycles the fan through the Normal/Natural/Sleep modes. Three indicators at
the right hand side of the control panel show which mode has been selected.
Normal: The speed stays constant.
Natural: The speed varies like natural wind.
Sleep: Similar to the Natural mode, but the speed averages slower speeds as time progresses.
OSCILLATION:
The fan oscillation is turned on and off by pressing the OSC button. When selected, the top indicator at the right hand side is on.
TIMER:
A timer can be set to turn off the fan after a period of time (in half hour increments). By default, the timer is off. Press the timer button will
increase the timer by half an hour (up to 7.5 hours). After 7.5 hours has been set, pressing one more time will reset the timer to 0. There
are four indicators on the left hand side of the control panel. To determine the timer set time, add the different values up (ie if the 4h and
0.5h indicators are lit, the timer has been set to 4.5 hours). As time progresses, the indicators will adjust. When the timer expires, the
appliance will turn off. The timer can be adjusted at any time by pressing the Timer button.
CLEANING & MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT IMMERSE
APPLIANCE IN WATER!
The fan should be cleaned periodically (at least once a month depending on the build-up of dust).
Clean the body of the fan with a soft damp cloth. Always make sure that the appliance is completely dry before connecting back to the
mains supply. Remove the front grill, clean the fan blades with a soft damp cloth and replace the front grill.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the fan. NEVER use ALCOHOL OR
SOLVENTS.
Do not disassemble the fan in any manner.
STORAGE: Store the fan with these instructions in the original packaging, in a cool, dry place.
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference. Due to continual product development,
Omega Altise reserves the right to alter specifications or appearances without notice.
Dispose of packaging responsibly – recycle where facilities are available.
A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW 2208
In Australia: 1300 795 572
In New Zealand: (09) 415 6000
www.omegaaltise.com
IM Ref: OHVW46CR 07/2015/08
REMOTE