Loading ...
Loading ...
OMEGA ALTISE
TECHNICAL DETAILS
Model: OHVW46CR high velocity wall fan with remote control.
Power: 220-240V 50Hz, 60W.
Weight: 4.2kg.
Dimensions (HxWxD): 56x50.5x33cm.
GENERAL FAN PARTS
GETTING STARTED – ASSEMBLY AND WALL MOUNTING
1. Carefully remove the appliance parts from the plastic bag and the carton, and unwind the cord to its full length.
2. Place the rear guard over the front of the motor (small screw hole to the bottom, handle to the top) and fix into place
with the 4 rear guard screws.
3. Place the fan blade onto the motor impellor shaft, push until the blade screw is adjacent to the flat area on the shaft
and tighten into place with the blade screw. Note: the screw must fix to the flattened area of the shaft.
4. Hang the front guard over the rear guard (small screw bracket to the bottom) and attach using the clips around the
outer edge. Use a small screwdriver to attach the bottom of the 2 grills together using the small guard screw and
guard nut.
5. Select a safe, appropriate location on a strong wall (taking note of distance to a power outlet). Mark the 3 mounting
holes of the mounting bracket on the wall and fix to the wall (for brick or concrete walls use the anchoring bolts
provided).
6. Place the base onto the mounting bracket and push down tightly to fix in place.
7. Plug the cord set into a 220-240V~A.C. 50Hz earthed electrical outlet. Turn the power on at the electrical outlet.
Note: The power cord must not be able to drop onto the motor or grills.
PART DESCRIPTION
1 Front Guard
2 Fan Blade
3 Rear Guard Screws
4 Rear Guard
5 Motor Impellor Shaft
6 Moto
r
7 Power Cord
8 Control Panel
9 Base
10 Guard Nut
11 Guard Screw
Loading ...