Loading ...
Loading ...
Loading ...
43
EN
Display message Possible Cause Possible Solution
FdL
(or F29)
The door cannot unlock. Firmly press the door on the area
of the door lock, then press On/O
for at least 3 seconds.
If hot cycle is selected, wait until
cool down and press again On/O
for at least 3 seconds.
Switch on the washing machine.
If failure still appears, check and
eventually remove possible cause
as indicated for failure “Clean
lter”. Then switch the washing
machine on again. If door does
not unlock, press On/O for at
least 3 seconds.
If door still does not unlock, refer
to section “DOOR – HOW TO OPEN
IT IN CASE OF A FAILURE”. Before
draining water / opening the door,
wait until the water has cooled
down (for hot wash programmes).
Fod Excessive foam formation
(maybe by overdosage of
detergent) interrupted the
programme. The interruption
can be repeated several times
until the foam reduction is
sucient.
Start “Rinse&Spin” programme,
with option Intensive Rinse.
Respect the dosing
recommendations by the
detergent manufacturer.
Adjust and use the Dosing Aid
function.
Make sure that the water lter is
clean.
Loading ...
Loading ...
Loading ...