User Manual - Page 9

For SCD535/00.

Loading ...
Loading ...
Loading ...
9
Dry materials Material
thickness
Loss of
range
Metal grilles or bars < 1cm /0.4in 90-100%
Metal or aluminium
sheets
< 1cm/0.4in 100%
For wet and moist materials, the range loss may
be up to 100%.
6 Features
The following features are described in chapter
‘Menu options’, as they can only be operated in
the menu of the parent unit:
Adjusting microphone sensitivity
Sound alert on/off
Setting room temperature range (minimum
and maximum temperature)
Temperature alert on/off
Vibration alert on/off
ECO mode on/off
Setting temperature scale (Fahrenheit or
Celcius)
6.1 Adjusting loudspeaker
volume
1 Press the volume + or – button on the baby
unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 22).
2 Press the volume + or – button on the parent
unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 23).
The displays give visual feedback on the
volume settings of the units: (Fig. 24)
1 minimum volume (parent unit and
baby unit)
2 maximum volume (parent unit and
baby unit)
D
Note:
If the volume is set to the lowest level, the
display shows ‘OFF’.
After 2 seconds the message ‘Linked’
disappears and the temperature and
humidity values are shown on the
display. (Fig. 18)
The rst time you switch on the parent
unit, the message ‘Language’ appears on
the display. Select the desired language
(see chapter ‘Menu options, section ‘Setting
display language’) (Fig. 19).
If no connection is established, the LINK
light on the parent unit ashes red. The
parent unit beeps from time to time
and the message ‘Searching’ appears on
the display, followed by the message ‘Not
Linked’ (Fig. 20).
5.1 Positioning the baby
monitor
1 Place the baby unit at least 1 metre/3 feet
away from your baby (Fig. 21).
2 Place the parent unit within the operating
range of the baby unit. Make sure it is at least
1 metre/3 feet away from the baby unit to
avoid acoustic feedback (Fig. 10).
For more information on the operating range,
see section ‘Operating range’ below.
5.1.1 Operating range
The operating range of the baby monitor is 330
metres/1000 feet in open air. Depending on the
surroundings and other factors that may cause
interference, this range may be smaller. Indoors
the operating range is up to 50 metres/150 feet.
D
Note:
If the ECO mode is switched on, the operating
range of the baby monitor is also smaller. See
section ‘ECO mode’ in chapter ‘Menu options’.
Dry materials Material
thickness
Loss of
range
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
< 30cm/12in 0-10%
Brick, plywood < 30cm/12in 5-35%
Reinforced concrete < 30cm/12in 30-100%
ENGLISH
Loading ...
Loading ...
Loading ...