Loading ...
Loading ...
Loading ...
Servicing Your Honda
95
Wheels
Installation
1.Reverse the removal procedure. Install the
side collars into the wheel. Carefully fit the
brake disc between the pads to avoid
scratching them.
2.Insert the front axle shaft from the right side,
through the right fork leg and wheel hub.
3.Tighten the front axle nut to the specified
torque:
46 lbf·ft (62 N·m , 6.3 kgf·m)
4.After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the brake
drags or if the wheel does not rotate freely.
Check front brake adjustment (page 84).
If a torque wrench was not used to install the
wheel, see your dealer as soon as possible to
verify proper assembly. Improper assembly
may lead to loss of braking capacity.
20YM CRF125FFB_31K28B60_FM.book 95 ページ ２０１９年３月１日 金曜日 午後１時４８分
Loading ...
Loading ...
Loading ...