Loading ...
Loading ...
Loading ...
Folding the rear bench seat forward
If the driver's or front-passenger seat is set for a
larger person, it may not be possible to fold the
rear bench seat forward. In this case, move the
front seats as far forward as possible.
X
Move the head restraints to the lowest posi-
tion (Y page 100).
X
Fold seat cushion : up.
X
Pull release handle ; up in the direction of
the arrow until the backrest is fully released.
X
Fold the backrest forward until it reaches the
cargo compartment position.
X
Guide seat belts ; under respective clips :.
Folding the rear bench seat back
X
Fold seat backrest ; back until it engages.
Make sure not to trap the seat belt while doing
so.
X
Swing seat cushion : back.
X
Pull up and adjust the head restraints if nec-
essary (Y page 100).
Securing loads
Cargo tie-down rings
G
WARNING
The Top Tether anchorages cannot secure a
load. If you secure a load with the Top Tether
anchorages, the Top Tether anchorages could
be pulled out during braking, abrupt changes
in direction or in the event of an accident. The
load could slip, tip over or be flung around and
thereby hit vehicle occupants. There is a risk
of injury.
Only use the cargo tie down rings when secur-
ing a load.
Observe the following notes on securing loads:
R
Secure the load using the cargo tie-down
rings.
R
Distribute the load on the cargo tie-down
rings evenly.
R
Do not use elastic straps or nets to secure a
load, as these are only intended as an anti-slip
protection for light loads.
R
Do not route tie-downs across sharp edges or
corners.
R
Pad sharp edges for protection.
Stowage areas
299
Stowage and features
Z
Loading ...
Loading ...
Loading ...