Loading ...
Loading ...
Loading ...
Driving systems
Display messages
Possible causes/consequences and MM Solutions
À
Attention Assist:Attention Assist:
Take a Break!Take a Break!
Based on certain criteria, ATTENTION ASSIST has detected fatigue or
a lack of concentration on the part of the driver. A warning tone also
sounds.
X
If necessary, take a break.
During long journeys, take regular breaks in good time so you get
enough rest.
À
Attention AssistAttention Assist
InoperativeInoperative
ATTENTION ASSIST is inoperative.
X
Visit a qualified specialist workshop.
Á
Drive More SlowlyDrive More Slowly
You cannot change the vehicle level.
Possible causes are:
R
You are driving too fast for the selected vehicle level
R
You are driving too fast with a trailer or the trailer-coupling socket is
being used, e.g. for a bicycle rack
X
Drive more slowly and then select the desired vehicle level again.
R
Vehicles with the Off-Road Engineering package (Y page 179)
R
Vehicles with the AIRMATIC package (Y page 185)
X
Observe the notes on towing a trailer (Y page 221).
Á
Compressor Is Cool‐Compressor Is Cool‐
inging
You have selected a higher vehicle level. The compressor first needs
to cool down because of frequent level changes.
X
Drive in a manner appropriate for the current vehicle level.
X
Make sure that there is sufficient ground clearance.
X
Allow the compressor to cool down.
When the compressor has cooled down, the display message dis-
appears. The vehicle then continues rising to the selected level.
Á
MalfunctionMalfunction
AIRMATIC is malfunctioning.
X
Drive as appropriate for the current vehicle level, but do not exceed
50 mph (80 km/h).
X
Make sure that there is sufficient ground clearance.
X
Visit a qualified specialist workshop.
Display messages
261
On-board computer and displays
Z
Loading ...
Loading ...
Loading ...