Loading ...
Loading ...
Loading ...
en Operating the appliance
28
Water Plus/Rinse Plus
(l, Water+, Rinse+, Aqua Plus, Water
Plus, Rinse Plus)
Setting depending on the model
Increased water level and additional
rinse cycle; extended washing time. For
areas with very soft water or for further
enhancing the spin result.
Less Ironing
(æ, æ Easy-Iron, Less Ironing)
Setting depending on the model
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note: The laundry's residual moisture is
increased.
Prewash
(s, Prewash)
Setting depending on the model
For heavily soiled laundry.
There will be a prewash cycle at a low
temperature before the main wash
cycle.
Note: Pour detergent into compartment
I for the prewash cycle and into
compartment II for the main wash cycle.
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Notes
■ The washing machine must be
correctly installed and connected.
~ "Positioning and connecting"
on page 12
■ Before washing for the first time, run
a wash cycle without laundry.
~ "Before washing for the first
time" on page 18
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
~ "Childproof lock" on page 31
Use the programme selector to select
the programme you require. The
programme selector can be rotated in
either direction.
The display alternately shows the
programme length and the maximum
load (when the door is open).
Loading ...
Loading ...
Loading ...