Loading ...
Loading ...
Loading ...
Plasmacluster
E-10
OPERATION
MAIN UNIT OPERATION
Operations available with main unit
• AUTO operation (fan level)
• Silent operation (fan level)
• Medium operation (fan level)
• High operation (fan level)
• Max operation (fan level)
• Pollen mode operation
The unit will start operation when the MODE/
button is pressed.
The unit will start operation in AUTO operation (fan level).
• During operation, the cluster ion lamp will be lit.
The operation mode is switched as follows every time the button is pressed.
The lamp for the operation mode that has been set is lit.
The operation mode suited to the usage condition can be set.
Stop
Auto operation
The fan level is automatically
switched (High, Medium, Si-
lent) depending on the amount
of pollution in the air detected
by the sensor for efficient air
purification.
Silent operation
The unit will operate quietly
using minimal air intake.
Pollen mode Operation
The unit will operate at High level for
10 minutes, then will alternate be-
tween Medium and High.
Medium to Max operation
The unit will operate at a fan level of
medium, high or max.
For the first 30 seconds after the power plug is inserted
into the wall outlet, the unit will check the condition of the
air. If operation is set to ON during this time, the CLEAN-
SIGN lamp will alternately flash green, orange and red.
Cluster ion lamp
MODE/ button
10 minutes: High fan level
20 minutes: Medium fan level
20 minutes: High fan level
Loading ...
Loading ...
Loading ...