Loading ...
Loading ...
Loading ...
7
Ice Maker
www.insigniaproducts.com
4 Peel off the label covering the ice maker hole on the back of the refrigerator, then
remove the foam from the hole with the needle nose pliers. Retain the foam for
future use.
5 Push the water inlet tube into the small hole on back of refrigerator. Rotate while
inserting the tube until the flat surface of inlet tube is tight against the back of the
refrigerator.
6 Secure the water inlet tube to the back of the refrigerator with two of the provided
chrome head screws with washers.
IMPORTANT: Make sure that the end of the water inlet tube inside the refrigerator
does not touch the edge of the ice maker.
Remove label
Insert this end into
Loading ...
Loading ...
Loading ...