Loading ...
Loading ...
Loading ...
15
Ice Maker
www.insigniaproducts.com
9 Place the end of the water supply line into a sink or bucket and flush the water supply
line with water until the water runs clear.
10 Unscrew the plastic cap from the water inlet valve and discard it.
11 Slide a brass compression nut, then a ferrule (sleeve), onto the water supply line.
12 Push the end of the tubing into the water inlet valve as far as it will go or ¼-inch, then
slide the ferrule (sleeve) into the valve inlet and finger tighten the compression nut
onto the valve. Tighten another half turn with a wrench. DO NOT overtighten.
Notes:
• Before making the connection to the refrigerator, be sure the refrigerator power
cord is not plugged into the wall outlet.
• If your refrigerator does not have a water filter, we recommend installing one if
your water supply has sand or particles that could clog the screen of the
refrigerator’s water valve.
1/4" tubing
1/4" compression nut
Water inlet valve
Loading ...
Loading ...
Loading ...