Loading ...
Loading ...
Loading ...
C:\Users\User\Desktop\SB\SY19_SB85_UC2_RG_121\FY19\Map\SB\4748447121_US.f
m
master page: Right
XBR-85X950G / 75X950G / 65X950G / 55X950G
4-748-447-12(1)
13
US
1 Remove the screws from the rear of the TV.
2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top Stand from the TV
To detach the Table-Top Stand from the TV, remove the screws .
Note
• Be careful when lifting the TV as the Table-Top Stand is detached, the Table-Top Stand may topple over
and cause personal injury.
• Take care
when removing the Table-Top Stand from the T
V to prevent it from falling over and damaging
the surface that the TV is sitting on.
• Do not remove th
e Table-Top Stand for any reason other tha
n to install corresponding accessories on the
TV.
• Be sure
the TV is vertical before t
urning on. To avoid uneven picture uniformity do not power on the TV
with the LCD panel facing down.
• When attaching t
he Table-Top Stand again, be sure t
o fasten the screws (previously removed) to the
original holes on the rear of the TV.
Wall-Mount Bracket (not supplied)
Screw (not supplied)
US
Loading ...
Loading ...
Loading ...