Loading ...
Loading ...
Loading ...
6
ENGLISH_index
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV
from being scratched or damaged and for safe transportation regardless
of its type and size.
It is recommended to move the TV in the box or packing material
that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and all
cables.
When holding the TV, the screen should face away from you to
avoid damage.
Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grille area.
Use at least two people to move a large TV.
When transporting the TV by hand, hold the TV as shown in the
following illustration.
When transporting the TV, do not expose the TV to jolts or excessive
vibration.
When transporting the TV, keep the TV upright; never turn the TV
on its side or tilt towards the left or right.
When handling the TV, be careful not to damage the protruding
buttons.
Avoid touching the screen at all times, as this may result in
damage to the screen.
Do not place the product on the floor with its front facing
down without padding. Failure to do so may result in
damage to the screen.
When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a minimum of 10 cm (4 inches) space from the wall for
proper ventilation.
10cm
10cm
(4inches)
10cm
10cm
10cm
(Depending upon model)
2 Connect the power cord to a wall outlet.
Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
Do not use any unapproved items to ensure the safety and
lifespan of the product.
Any damages or injuries by using unapproved items are not
covered by the warranty.
Make sure that the screws are fastened tightly. (If they are
not fastened securely enough, the TV may tilt forward after
being installed.)
Do not fasten the screws with excessive force otherwise
they may strip and become loose.
Loading ...
Loading ...
Loading ...