User Manual Kenmore Elite 49119 Oven - Black

Documents for Kenmore 49119

The following documents are available:
User Manual Photos
49119 photo
MICROWAVE/ WALL OVEN COMBINATION
INSTALLATION INSTRUCTIONS
1
*
2” (5 cm) Wide Wood Spacer if
Needed (see note 4)
Electrical
Junction Box
Door Open
(see note 2)
Spacer
B
C
A
D
44 1/8”
(112.1 cm)
1 1/2” (3.8 cm)
Min.
Hole for
cable
3” (7.6 cm)
Max.
2”
(5.1 cm)
Min
.
11 1/2”
(29.2 cm)
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY: Do not store or use gasoline or other ammable
vapors and liquids in the vicinity of this or any other appliance.
All dimensions are in inches (cm).
Printed in United States
United States
and Canada
Figure 1
Do not remove
spacers (if equipped) on the
side walls and/or on the back
of the built-in oven. These
spacers center the oven in
the space provided. The oven
must be centered to prevent
excess heat buildup that may
result in heat damage or re.
NOTES:
1. Base must be capable of supporting 275 pounds
(125 kg) for 27" models and 350 pounds (159 kg) for
30" models.
2. Allow at least 22" (55.9 cm) clearance in front of oven
for door depth when it is open.
3. Dimension G (cutout depth) is critical to the proper
installation of the built-in oven. If the oven decorative
trim does not butt against the cabinet, or if noise is
heard on convection models, verify dimension G to
assure it is according to the required dimension.
**4. For a cutout height (H) between 44½"
(113 cm) and
45
1
/
8
" (114.6 cm) add a 2" (5 cm) wide wood shim of
appropriate height to each side of the opening under
the appliance side rails. Lifting the unit will allow you
to hide the cutout openings showing above the unit.
The bottom trim of the unit will hide the shims at the
bottom.
**5. For a cutout height (H) between 45
1
/
8
" (114.6 cm)
and 46
7
/
8
" (119.1 cm) you can order a larger bottom
trim through your Service Center.
* Suggested distance from
oor is 11½" (29.2 cm).
Minimum required
distance is 4½" (11.4 cm).
PRODUCT DIMENSIONS
MODEL A B C D
27" (68.6 cm) Wall Oven 27 (68.6) 45
9
/
16
(115.7) 24
5
/
8
(62.5) 24
1
/
2
(62.2)
30" (76.2 cm) Wall Oven 30 (76.2) 45
9
/
16
(115.7) 28
1
/
4
(71.8) 24
1
/
2
(62.2)
CUTOUT DIMENSIONS AND CABINET WIDTH
F G (Min.)
H. Standard Height
(**Others, see notes 4 & 5)
I
MODEL Min. Max. Min.
Max.
27" (68.6 cm) Wall Oven 25
5
/
8
(65.1) 25
7
/
8
(65.7) 23
1
/
2
(59.7) 44
1
/
4
(112.4) 44
1
/
2
(113) 27
1
/
8
(68.9) Min
30" (76.2 cm) Wall Oven 28
1
/
2
(72.4) 29 (73.7) 23
1
/
2
(59.7) 44
1
/
4
(112.4) 44
1
/
2
(113) 30
1
/
8
(76.5) Min
Your new wall oven has been designed to t a limited variety of cutout sizes to make
the job of installing easier. The rst step of your installation should be to measure your
current cutout dimensions and compare them to the cutout dimensions chart below for your model. You may
nd little or no cabinet work being necessary.
P/N 807611003 (1403) Rev. A
English – pages 1-6
Español -paginas 7-12
Français -pages 13-18
Loading ...
Loading ...
Loading ...