Documents: Go to download!
- Owner's manual - (English)
French Door User Manual Kenmore Elite 75043
Table Of Contents
- Warranty
- Protection Agreements
- Important Safety Instructions
- Electrical & Grounding Requirements
- Parts and Features
- Refrigerator Installation
- Unpacking Your Refrigerator
- Installation
- Removing/Replacing Your Refrigerator and
- Freezer Handles, Doors and Drawers
- Leveling and Door Alignment
- Using Your Refrigerator
- Setting the Controls
- Smart Features
- Instruction For Smart Grid
- In-Door Ice Bin
- Automatic Icemaker
- Food Storage Guide
- Refrigerator Section
- Water Dispenser
- Refrigerator Shelves
- Humidity Controlled Crisper
- Temperature Controlled Pantry Drawer
- Door Bin
- Air Filter
- Freezer Section
- Extra Ice Bin
- Pullout Drawer
- Durabase
- Durabase Divider
- Water Filter
- Care And Cleaning
- General Cleaning Tips
- Exterior
- Inside Walls
- Door Liner And Gaskets
- Plastic Parts
- Condenser Coils
- Light Bulb Replacement
- Power Interruptions
- When You Go On Vacation
- When You Move
- Connecting the Water Line
- Troubleshooting Guide
- Kenmore DiagnosticsTM System
- Service
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from the illustrations on this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of the handle with a 1⁄8 in. Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1⁄4 in. Allen wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from the illustrations on this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws with a 1/8 in. Allen wrench.
NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1⁄4 in. Allen wrench.
REFRIGERATOR INSTALLATION
Reinstalling the Refrigerator Door
Left Door
Lower the door onto the middle hinge pin (10).
Fit the top hinge (7) over the hinge lever latch (8) and into place. Rotate the lever (6) clockwise to secure the hinge.
Install the grounding screw (5) and connect the two wire harnesses (4).
Push the water tube (3) located at the top of the left door into the hole beside the left hinge on the top of the cabinet until it exits through the back.
Insert the water supply tube (3) into the connector until you see only one scale mark. Fully insert the tube over in. (15 mm).
Hook the tabs on the left side of the hinge cover (1) under the edge of the top hinge (7) and position the cover in place. Insert and tighten the cover screw (1).
Right Door
Lower the door onto the middle hinge pin (9).
Fit the top hinge (4) over the hinge lever latch (5) and into place. Rotate the lever (3) counterclockwise to secure the hinge.
Hook the tabs on the right side of hinge cover (2) under the edge of the top hinge (4) and position the cover in place. Insert and tighten the cover screw (1).
See other models: 70402 99059 74039 70423 70643
