Loading ...
Loading ...
Loading ...
Reinstalling The Jack And Tools (2500 And 3500
Series)
1. Tighten the jack all the way down by turning the jack
turn-screw counterclockwise until the jack is snug.
2. Position the jack and tools into bracket assembly. Make
sure the lug wrench is under the jack near the jack
turn-screw. Snap tools into bracket assembly clips. In-
stall the jack into bracket assembly and turn the jack-
turn-screw clockwise until jack is snug into bracket
assembly.
3. Place the jack and tool bracket assembly in the storage
position holding the jack by the jack turn-screw, slip the
jack and tools under the seat so that the bottom slot
engages into the fastener on the floor.
NOTE: Ensure that the jack and tool bracket assembly
slides into the front hold down location.
Jack And Tools Bracket Assembly
Jack Hold Down Fastener
7
IN CASE OF EMERGENCY 511
Loading ...
Loading ...
Loading ...