Loading ...
Loading ...
Loading ...
Frequently asked questions
49
Messages in the display
Message Possible cause and solution
The alarm symbol is
lit up in the display and
both wine conditioning
zone sensors flash in
the control panel. An
audible alarm is also
sounding.
The door alarm has been activated.
Close the wine unit door. Both wine conditioning
zone sensors and the alarm symbol will go out
and the acoustic alarm will stop.
The alarm symbol is
flashing in the display
and the sensor for one
of the wine conditioning
zones is flashing. An
audible alarm is also
sounding.
The temperature in the zone concerned has risen
higher or fallen lower than the temperature set
For instance, this could be due to
– the door being opened too frequently,
– blocked ventilation gaps,
– a lengthy interruption to the power supply.
Rectify the cause of the alarm. The alarm symbol
will go out and the sensor for the zone con-
cerned will light up constantly again. The audible
alarm stops.
The Change Active Air-
Clean filter symbolis
lit up.
This is the reminder to change the Active AirClean fil-
ter.
Replace the Active AirClean filter and then confirm
the filter change in settings mode (see "Active Air-
Clean Filter").
A dash is lit up up/flash-
ing in the display.
Only temperatures within the range of the appliance
temperature will be displayed.
The sym-
bolsF1toF3orS1toS3a
ppear in the display.
There is a fault.
Contact Miele Technical Service.
Loading ...
Loading ...
Loading ...