Loading ...
Loading ...
Loading ...
11INSTALLING THE GAS ELEVATED COOKER
INSTALLING THE GAS ELEVATED COOKER
Operation on SNG
• If the cooker is to be used with SNG, then the grill
burner MUST be modified by the replacement of the
shutter, which fits into the throat of the grill burner.
• A conversion kit can be obtained by contacting the
Customer Care Centre.
Restraining Device
Anchor Points
Connection
Gas
Point
150mm
650mm
Grill shutter
WARNING
WARNING
Disconnect electric power before removing control panel.
1. Remove the control panel.
2. Remove the existing NG shutter securing screw (refer
to diagram above) and slide upwards to disengage
from grill burner.
3. Slide the SNG shutter into position and secure with
screws.
Testing the gas cooker
WARNING
WARNING
You MUST test the cooker after installation, before you
hand it over to the customer.
You MUST have a manometer and a connecting tube.
Gas connection
Read these points before connecting to the gas supply:
• An NG regulator is supplied.
• Ensure installation allows withdrawal of appliance.
Operation on NG gas regulator
1. The appliance regulator MUST be orientated so that
the pressure nipple is accessible.
2. The arrow showing the direction of flow MUST be
pointed correctly.
3. The regulator has ½” BSP internal thread at the inlet
and outlet.
4. The flat fibre washer provided with the regulator
MUST be used when making the gas connection.
Loading ...
Loading ...
Loading ...