Loading ...
Loading ...
Loading ...
3 Place the retaining ring holder on the retaining
ring, turn it counterclockwise and lift it o
the shaving head. Remove the retaining ring
from the retaining ring holder and repeat this
process for the other retaining rings. Place them
aside in a safe place.
4 Remove the shaving heads from the shaving
head holder. Discard the used shaving heads
immediately to avoid mixing them with the new
shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides
of the shaving heads t exactly onto the
projections in the shaving head holder.
6 Place the retaining ring holder on the retaining
ring, place it on the shaving head and turn it
clockwise to reattach the retaining ring. Repeat
this process for the other retaining rings.
- Each retaining ring has two recesses that t
exactly into the projections of the shaving head
holder. Turn the ring clockwise until you hear a
click to indicate that the ring is xed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
2
3
1
1
3
2
1
19
4222_002_5921_1_DFU-Luxury_A6_v9.indd 19 02/05/17 09:03
Loading ...
Loading ...
Loading ...