Loading ...
Loading ...
Loading ...
8. Remove the screw hole cover from the left
holes as illustrated and transfer them to the
holes at the right side.uncovered
screw hole cover
screw hole covers
screw hole cover
screw hole covers
7. Lift the lower door and set it on a non
scratching surface with the outside up
NOTE: When removing the door, watch for
washer(s) between the hinge and the
bottom of the freezer door that may stick to.
the door. Do not lose .
center
these
12. Transfer the lower door to the
position, adjust the lower hinge part, the
hinge into the lower hole of the lower
door, then tight the bolts.
new
fit
pin
9. Lay the refrigerator on soft foam
packaging or similar material. Remove both
adjustable bottom feet parts, and remove
the front feet fixed board and the lower
hinge part by unscrewing the special flange
self-tapping screws.
front feet fixed board
ajustable bottom
feet part
special flange
selftapping screws
lower hinge part
ajustable bottom
feet part
special flange
selftapping screws
10. Unscrew the bottom hinge and
it to the .
pin move
adjoining hole
11. Replace the lower hinge part to the left
side and it with the special flange self-
tapping screws. Replace the front feet fixed
board to side and it with the
special flange self-tapping screws. Install
the ajustable bottom feet parts,
fix
the other fix
lower hinge part
front feet fixed board
13. the middle hinge part 180
, transfer it and adjust its position
, the middle hinge into the upper hole
of the lower door, tight the bolts.
Turn by
degrees
Fit pin
14.Transfer th e upper door to the
appropriate position. Secure the door's level;
the middle hinge into the lower hole of
the upper door.
fit pin
9
Loading ...
Loading ...
Loading ...