Loading ...
Loading ...
Loading ...
Instructions for the user
46
5.3.1 Pan detection
Every cooking zone has a cookware detector that only starts the cooking if there
is a well positioned container with the suitable characteristics present on the
hotplate.
If the container is not well positioned or is not made of the correct material and
still tries to activate the hotplate, after a few seconds from the
hotplatesactivation,the' symbol will appear on the display.
5.3.2 Residual heat
Each cooking zone is equipped with a residual heat warning device. After any
zone is switched off, a flashing may appear on the display. This warns that
the cooking zone concerned is still very hot. Cooking can be restarted while the
is flashing.
5.3.3 Cooking hob control lock-out
When not in use, the hob controls can be locked from being accidently turned on
by children.
With the hotplates switched off turn both knobs to symbol A and hold them
there for approximately 2 seconds until the symbols appear on the power
display. Then release the knobs.
The function can be activated by rotating just one knob to symbol A and holding
it there for at least 5 seconds.
To unlock it repeat the same operation: The hotplates displays will show a 0 that
will indicate that the hotplates lock has been deactivated.
5.3.4 Error message
The functions of all the controls are monitored. If an error situation occurs for
one of the knobs, the unaffected zones will continue their normal operation. The
cooking zone affected by the error will switch off automatically and the symbol
will appear on the display.
Loading ...
Loading ...
Loading ...