Loading ...
Loading ...
Loading ...
Cleaning and care
27
Removing the panels and grease
filt
ers
The grease filters and panels can fall
ou
t when you are handling them.
This can result in damage.
Make sure you hold the filters and
panel
s securely at all times when
handling them.
DA 6596 D: Pull the front edge of the
panels down out of the lock, lower
them slightly, unhook them at the
back, and take them out.
D
A 6526 D: Pull the outer edge of the
panels down out of the lock, lower
them slightly, unhook them in the
middle, and take them out.
T
o remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the panels by hand
F
ollow the instructions under
"Housing."
Cleaning the grease filters by hand
Cle
an the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
t
o the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degr
easer sprays
– Oven sprays
Loading ...
Loading ...
Loading ...