User Manual Samsung VS15T7032R4/AA Jet 70 Pet Cordless Stick Vacuum

Samsung VS15T7032R4/AA Jet 70 Pet Cordless Stick Vacuum - Use Manual - Use Guide PDF.
Documents: Go to download!
User Manual

• User Manual - (English, Spanish)

Warranty

• Warranty - (English)

Table of contents

• Name of the parts
• Using the vacuum cleaner
• Maintaining the vacuum cleaner
• Notes and cautions
• Troubleshooting

User Manual

Name of the parts

1. Pipe
2. Dustbin
3. Metal mesh grille filter
4. Washable micro filter
5. Ultra fine dust filter
6. Dustbin release button
7. Display
8. Power() button
9. Suction power control button
10. Handle
11. Battery level indicator
12. Battery release button
13. Pipe release button
14. Brush release button
15. Vacuum charging part
16. Accessory holder
17. Battery charger

Using the vacuum cleaner

Using the wall mount

Charging the battery

• When the battery level indicator is at its lowest level and blinks( ) charge the battery.
• When charging the vacuum, make sure the connection part of the wall mount is correctly connected.
• The vacuum cleaner cannot be used while it is charging.

CAUTION

• Before ejecting the battery, the product must be turned off. (If the battery is forcibly ejected while the vacuum is operating, the vacuum can malfunction.)
• Be careful not to drop the battery. If you do, you can injure yourself or damage the battery.

Operating the vacuum cleaner

If the brush clings to floors (such as a carpet, a mat, or bedding, etc.) or does not spin properly, change the suction power to ‘MIN’ or ‘MID’ mode.

Using the accessories

If the spinning brush stops working, check whether it has overheated or has something stuck in it. (Please refer to the troubleshooting part of this manual.)

Maintaining the vacuum cleaner

CAUTION

• Turn off the vacuum cleaner before cleaning it.
• If the dustbin or filter is filled with dust, the vacuum cleaner may stop to prevent overheating.
• You should clean the dustbin or filter before it fills to the MAX line.

Emptying and cleaning the dustbin

Cleaning the filter

To maintain the best performance of the filter, remove the dust on the filter frequently and clean the filter with water once a month.

• After cleaning, dry completely for more than 24 hours in the shade before use.
• When heat is applied, product malformation may occur.

Washable micro filter

Ultra fine dust filter

When assembling, turn the filter until the line below the lock image is not visible.

Cleaning the accessories

Soft Action Brush

NOTE

• When foreign matter remains on the brush, remove it with a wet tissue or a dry cloth.

CAUTION

• Do not clean the spinning brush and suction part with water.
• Do not use the Soft Action Brush to remove moisture such as spilt liquid or pet’s waste.

Turbo Action Brush

If the foreign matter is not removed, use scissors to remove it.

NOTE

• If a cloth or other foreign matter is vacuumed up and tangled with the spinning brush, the spinning brush will stop working to protect the brush motor. After cleaning the brush, turn the power off and then on again.
• If a brush does not work after cleaning, turn the power off and then on again.
• When cleaning the brush, be careful not to catch your fingers in the fold of the brush.

Wet Brush

NOTE: If the spinning brush does not work even after cleaning the Soft Action Brush and Wet Brush, the overheating prevention device of the brush motor might be in operation. Wait 30 minutes or more to cool the motor and operate again.

Notes and cautions

Battery usage

NOTE

• If your vacuum cleaner does not work after you charge the battery, change the battery. If it still does not work with the new battery, contact a Samsung service center.
• When you purchase a battery in a Samsung service center, check for the genuine Samsung logo on the battery ( SAMSUNG ) and the battery name (VS20T75**** Series: VCA-SBT90 / VS15T70**** Series: VCA-SBT90E).

CAUTION

• Do not disassemble the battery or the wall mount.
• Do not apply heat to the battery and do not put the battery in a fire.
• As the battery is manufactured only for this product, do not use the battery for other electronic appliances or other purposes.
• Removing the battery during operation may cause product malfunction.
• If the battery is removed while the vacuum cleaner motor is operating, the battery may not work for 30 seconds after being re-attached for safety reasons.
• Battery charging time and usage time may shorten with increased battery use. When the battery no longer charges or runs down quickly, replace the exhausted battery with a new one.
• Use only the wall mount and batteries provided by Samsung.
• Before inserting the battery, confirm that the battery is being inserted in the correct direction and orientation.
• When discarding a dead battery, put it into a battery collection box for recycling.
• If you are not going to use your vacuum cleaner for a long time, detach the battery from the vacuum.
• When attaching the battery to the vacuum, insert it until you hear a click.
• This assures that the battery is firmly attached.
  • Otherwise, the battery may fall and could cause product damage or injury.
• Do not drop or strike the battery or subject it to a sudden shock.
• Do not disassemble the battery and make sure that you do not create a short circuit across the plus (+) and minus (-) terminals.
• Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid gets on your skin, wash the affected area quickly with water. If the liquid gets into your eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.
• To protect the motor and battery, the vacuum cleaner may not operate when the temperature is lower than 5 °C or higher than 45 °C.
• If you are not going to use the vacuum for a long period of time or you’re going to be away from home for a long period of time, unplug the wall mount, and then detach the wall mount from the battery. When the battery is not being charged and not being used, it will slowly discharge.
• When the battery level is low, recharge it. If the level of the battery remains low for a long period of time, it can cause the performance of the battery to degrade.

Operation

NOTE

• If excessive force is applied to a brush or foreign matter is caught in the spinning brush, the brush may stop working to protect the motor or vacuum. Turn the vacuum off, remove the foreign matter, and then turn the vacuum on. If the vacuum does not start, turn it off and then on again.
• Static electricity may occur depending on the humidity, temperature, or floor material, etc. in your home. If it happens repeatedly, contact a Samsung service center.
• Please charge the battery fully:
  • Before using a newly purchased battery for the first time or if you haven’t used the battery for a long time.
  • When the battery level indicator is on the lowest indication and blinks.
• Gently clean the multi-use wet pads by hand, using a mild detergent.
• The multi-use wet pads can be cleaned using a washing machine.
• However, if the wet pads are exposed to fabric softener or heat (such as boiling or hot water), they may get damaged and not work as well.
• Only use genuine Samsung wet pads.
• If the wet brush is used without a wet pad, any product malfunction will not be covered by warranty and a service fee will be charged for repair.
• To purchase additional multi-use wet pads for the wet brush, contact a Samsung service center.
• To purchase additional single-use wet pads. (*Make sure to check the model name VCA-SPA90.)

CAUTION

• When the spinning brush inside a brush is working, do not touch the brush.
  • Otherwise, your hand can be caught and it may cause an injury.
• Before using the wet brush, detach the wet pad and put some water on it, then reattach it to the spin disk.
• Do not use the vacuum cleaner on items that can be scratched (TV and monitor screens, etc.)

Maintenance

NOTE

• Sometimes the wheel of a brush can scratch the floor. Before using the vacuum cleaner, check the wheels of the brush.
  • If there is foreign matter on the wheel of the brush which cannot be removed easily, contact a Samsung service center.
• If the inner part of the wet brush is clogged with a large foreign matter, spinning speed decreases or stops.

CAUTION

• Storing the vacuum cleaner in sunlight for long hours may cause parts of the vacuum to deform or discolor. Therefore, after cleaning the parts of the vacuum cleaner, dry them in the shade.
• Do not clean the brush of the vacuum cleaner with water. Cleaning it with water can cause the brush to deform or discolor.
• Before cleaning the wall mount, you must unplug the wall mount.
• If you notice a continuous reduction in suction or the vacuum cleaner overheats abnormally, replace the ultra fine dust filter.
• After cleaning , , or with water, dry in the shade.
  • When heat is applied, product malformation may occur.

Troubleshooting

Before calling for service, review the problems and solutions below. If none of the suggested solutions resolve your problem, please visit our website at www.samsung.com or call Samsung Customer Care. Note that you will be charged for any service calls in which no defects were found.

The vacuum cleaner does not work.

• Check the battery level and charge the battery.
• Check whether the product is turned off, and then press the power button to turn it on.
• Check whether the pipe, dustbin or brush is blocked.
• Check whether the washable micro filter is inserted correctly.
• If the vacuum has not been used for a long time, charge the battery.
• If the battery dies, replace the battery.

Suction force decreases suddenly and the vacuum makes a vibrating sound.

• Check whether a brush, dustbin or pipe is clogged with foreign matter and remove it.
• Check whether the dustbin is fully filled with dust. If it is, empty the bin.
• Check whether the filter is dirty. If it is, clean the filter.

The vacuum cleaner cannot be charged.

• Check if foreign matter (dust) is on the charging terminal. Remove any foreign matter with a cotton swab or soft cloth.
• Check that the vacuum cleaner is properly aligned on the charging station and the LED of the battery level indicator is turned on.
• Confirm that the voltage provided to the wall mount matches the requirements of the wall mount.

The spinning brush does not work.

• Turn off the vacuum and check whether the brush is clogged with foreign matter. If so, remove the foreign matter and restart the vacuum.
• If the brush still does not spin, turn the vacuum cleaner off and back on a second time.
  • For the Soft Action Brush and Wet brush, if the vacuum overheats, it may take about 30 minutes for the motor to cool.

An odor is coming from the air outlet or filter of the vacuum cleaner.

• Empty the dustbin and clean the filters frequently.
  • As your vacuum cleaner is a new product, it may have a slight odor for the first 3 months after purchase.
  • If you use the vacuum cleaner frequently, accumulated dirt in the dustbin or dust on the filter may generate an odor.
• Replacement filters are available at your local Samsung service agent.

Cleaning is finished but small dust particles come out of the brush.

• After cleaning, operate the vacuum for 10 seconds or more on the MAX setting to suction up the small dust particles.

Vacuum cleaner stops operation during cleaning.

• The vacuum cleaner’s motor will shut off to prevent overheating:
  • When the vacuum operates with a full dustbin.
  • When the vacuum operates with suction part or brush clogged.
  • When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product on again. (This case may differ depending on the ambient temperature.)

Static electricity occurs when cleaning a thick and soft mat.

• Some types of mats such as a (childcare center mat or a noise prevention mat for between floors, etc.) may cause static electricity.
  • Move the brush on a normal floor for a while and clean again. This should get rid of the static electricity.

See other models: W2002-P3-White SM-G975UCKAXAA SM-T727VZSAVZW ET100 SM-G988UZAATMB