Loading ...
Loading ...
Loading ...
36
3. Fill the steam feeder just to the filter screen.
4. Place the steam feeder in the drawer; then push in the
drawer until it clicks into place.
w
WARNING
•
Failure to follow this warning
can cause serious injury or death.
• Failure to
follow this warning can cause serious injury or death.
Custom program
If you have a special combination of settings that you
use frequently, you can save these settings as a custom
program.
* To save a custom program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3
seconds.
To recall a custom program:
1. Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button to start the cycle.
Steam functions
To Fill the Steam Feeder
1. Pull out the drawer.
2. Lift out the steam feeder.
Drawer
Steam
Feeder
Water
ONLY
NOTE
You may save only one custom program at a time.
Pressing and holding the CUSTOM PROGRAM button
will overwrite any previously saved custom program.
NOTE
Before using a Steam Cycle, the steam feeder must be
filled with water up to the MAX line. If not, the
error will be displayed. If you see the error,
make sure that the steam feeder is filled with water
and the drawer is fully closed. Turn the dryer off then
restart the Steam Cycle.
• Only use water. Do not fill the steam feeder with
foreign substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder
is empty.
• Do not use distilled water; the water level sensor in
the steam generator will not work.
• Be careful when inserting the Steam Feeder
otherwise water will overflow.
• Wipe up any spilled water around the Steam Feeder
and the drawer before starting the dryer.
• Do not fill the steam feeder with hot water (over
86°F/30°C).
HOW TO USE
MFL67731008_en_160524.indd 36 2016.5.24 10:51:50 AM
Loading ...
Loading ...
Loading ...