Loading ...
Loading ...
Loading ...
English 23
Installation
NOTE
• After connecting the water supply hose to the adaptor, check if it is connected properly
by pulling the water supply hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
For models with an additional hot water
inlet:
1. Connect the red end of the hot water
supply hose to the hot water inlet on the
back of the machine.
2. Connect the other end of the hot water
supply hose to the hot water tap.
Aqua hose (applicable models only)
A
The aqua hose alerts users of a risk of water
leaks. It senses the water ow and turns red
on the centre indicator (A) in case of a leak.
WD90J6A10AX-DC68-03628P_EN.indd 23 2017/11/30 16:30:55
Loading ...
Loading ...
Loading ...