Loading ...
Loading ...
Loading ...
E-27
Functions on the Projector
Setting Up the System
• Using this function, you can check the input signal and select the remote mouse.
Checking the system
• Press the MENU button. Select SYSTEM SETUP with
the ADJUSTMENT / buttons. Then press the ENTER
button to change to the picture indicated on the left.
• The current system conditions will be displayed on the
screen.
• Press the MENU button to select the normal screen
mode.
Note:
In the video screen, the resolution and frequency settings will
not be displayed.
Selecting the Remote Mouse
• Press the MENU button.
• Select SYSTEM SETUP with the ADJUSTMENT /
buttons. Then press the ENTER button.
• Select REMOTE MOUSE and then select either [AT] or
[98] with the ADJUSTMENT / buttons.
• Select [AT] when using IBM compatibles and Apple
Macintosh series.
• Select [98] when using NEC PC98 series (for Japan).
• Press the MENU button to select the normal screen
mode.
Checking the Lamp Usage Time
The lamp usage time can be checked at the On-Screen
Display.
1 Press the INPUT SELECT button on the projector or
remote control and select RGB INPUT.
2 Press the ENTER button to select the Memory Adjust-
ment mode.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT
/ buttons to select
“RGB ADJ.” Press the ENTER button. The MENU mode
changes as shown.
• While the RGB adjustment menu is displayed, press the
ADJUSTMENT
/ buttons to select “MEMORY SELECT.”
Then press the ENTER button to change the image.
3 Press the ADJUSTMENT / buttons and ENTER
buttons.
• The screen shown on the left will appear.
• Press the ADJUSTMENT button once to move to the
following screen.
• Using the ADJUSTMENT / buttons, select memory no.
“1” and then press the ENTER button. Then, repeating the
same procedure for each number separately, enter “7,” “0,”
“1,” “0,” and “0.”
4 The lamp usage time will be displayed at the On-
Screen Display for approximately 30 seconds.
On-Screen Display
SYSTEM SETUP
RESOLUTION
HOR FREQ
VERT FREQ
REMOTE MOUSE
:SEL.
:END
MENU
800×600
[
AT
]
:ADJ.
60Hz
37.9 KHz
SYSTEM SETUP
RESOLUTION
HOR FREQ
VERT FREQ
REMOTE MOUSE
:SEL.
:END
MENU
60Hz
800×600
[
AT
]
:ADJ.
37.9 KHz
RGB ADJ.
RGB INPUT ADJ.
IMAGE ADJ.
AUDIO
SYSTEM SETUP
LANGUAGE
:SEL. :NEXT
ENTER
:END
MENU
RGB ADJ.
BRIGHT
RED
BLUE
RESET
MEMORY SELECT
+
0
0
0
0
:SEL. :NEXT
ENTER
:END
MENU
-
+
-
+
-
+
-
PICTURE
➞
➞
MEMORY SELECT
SETTING
:SEL. :BACK
ENTER
:END
MENU
0 1 2 3 4 5 6 7
➞
LAMP
0000
H
➞
MEMORY SELECT
:SEL.
:ADJ.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
RESOLUTION
HOR FREQ
VERT FREQ
SETTING
:ENTER
Hz
KHz 38
60
800×600
Loading ...
Loading ...
Loading ...