Loading ...
Loading ...
Loading ...
sharkclean.comsharkclean.com
NOTE: All accessories are compatible with both the wand and the handle.NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to MAX suction and use setting II, Carpet.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, place foot on floor nozzle
and tilt handle back.
Select surface setting:
O Power O
I Hard Floor
For bare floors and small area rugs.
II Carpet
For carpets.
Your Suction Control slider located on the top of the
handle allows you to adjust your suction depending
on your floor type.
MIN: to reduce suction and increase maneuverability
on carpets.
MAX: to increase suction on bare floors.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as it should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum o, unplug from the wall and
remove any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum o and wait a
minimum of 45 minutes for it to cool down.
Press the Wand Release button to detach the
wand from the pod.
Press the Handle Release button to detach the
handle from the wand.
UPRIGHTPOWER/SURFACE SWITCH SUCTION CONTROL
INDICATOR LIGHT
ABOVE-FLOOR—WANDABOVE-FLOOR—HANDLE
Handle
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
Loading ...
Loading ...
Loading ...