Loading ...
Loading ...
Loading ...
En
6
5 PARAMETER control (page 10 )
Adjust the SOUND COLOR FX parameter.
6 SOUND COLOR FX selector button (page 10 )
Turn on/off the SOUND COLOR FX effects.
7 MIC TONE control (page 9)
Adjust the sound quality from the microphone.
8 MIC LEVEL control (page 9 )
Adjust the volume to output from the microphone.
9 LEVEL control
Adjust the volume from the AUX input.
a Input selector switches (page 9 )
Select an input source on each channel.
b TRIM control (page 9 )
Adjust the volume from each channel.
c MASTER LEVEL control (page 9 )
Adjust the volume from the [MASTER1] or [MASTER2] output.
d EQ/ISO (HI, MID, LOW) controls (page 9 )
Adjust the sound quality of the respective channels.
e Master Level indicator (page 9 )
It shows the volume from the MASTER output.
When the volume is too loud, the [CLIP] indicator flashes. In this
case, turn down the volume.
— Slow flashing: sound will become distorted.
— Fast flashing: sound is distorted.
f Channel Level indicator (page 9 )
It shows the volume before passing the channel fader.
g COLOR control (page 10 )
Change the parameters of the SOUND COLOR FX of the different
channels.
h CUE button (page 9 )
Press the [CUE] button for the channel you want to monitor.
i Channel Fader (page 9 )
Adjust the volume of each channel.
j EQ CURVE (ISOLATOR, EQ) selector switch (page 9 )
Switch the function of the [EQ/ISO (HI, MID, LOW)] controls.
k CROSS F.CURVE (THRU, , ) selector switch
(page 9 )
This switches the cross fader curve characteristics.
l CROSS F. REVERSE switch (page 9 )
Turn on/off the cross fader reverse function.
m Cross fader (page 9 )
Sound outputs following the curve selected by the [CROSS F.CURVE]
selector switch.
n RETURN TYPE (AUX, INSERT) selector switch
(page 10 )
Select the SEND/RETURN method.
o Mobile device connection terminal (USB port)
(page 8 )
Connect a mobile device.
p SEND/RETURN ON/OFF button (page 10 )
Turn SEND/RETURN on and off.
q SEND/RETURN LEVEL control (page 10 )
Adjust the sound level of SEND/RETURN.
r Display (page 10 )
BPM, effect parameter, etc., are displayed.
s BEAT c, d buttons (page 10 )
Set the beat fraction for synchronizing the effect sound.
t TAP (AUTO, WAKE UP) button (page 10 )
— TAP: Tap this button to enter BPM.
— AUTO: Press and hold this button to change the BPM
measurement mode.
— WAKE UP: Press this button to cancel the standby state.
u WAKE UP indicator (page 10 )
This indicator is lit when the unit is in the standby state.
v Beat effect selector switch (page 10 )
Switch the BEAT FX effect type.
w Effect channel selector switch (page 10 )
Switch the channel to which the BEAT FX and SEND/RETURN are to
be applied.
x TIME control (page 10 )
Adjust the BEAT FX’s time parameter.
y LEVEL/DEPTH control (page 10 )
Adjust the BEAT FX’s quantitative parameter.
z Beat FX ON/OFF button (page 10 )
Turn BEAT FX on/off.
Do not pull on the channel fader and cross fader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.
Loading ...
Loading ...
Loading ...