Loading ...
Loading ...
Loading ...
6
BEFORE USING FOR THE FIRST TIME
• Remove labels, stickers and packaging from the iron and soleplate.
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean of
any manufacturing residues. Rell the tank.
• The iron may give off an odour and small amount of vapour when switched on for the rst
time. This is normal and will stop as the element cures.
• Press the burst of steam button 3 or 4 times, to prime and ush clean water through the
burst of steam pump.
• Press the spray mist trigger 3 or 4 times, to prime and ush clean water through the cool
spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
PREPARATION
• Check for textile care symbols ( ) on items to be ironed.
• Iron fabrics needing low temperatures
rst, then those that need medium
temperatures
, and nish with those needing high temperatures .
TEMPERATURE SETTING GUIDE
For best results follow manufacturer’s garment care tags for recommended heat and steam
setting instructions.
LABEL MARKING TEMPERATURE DOT SETTING
cool - nylon, acrylics, polyester, synthetics •
warm - wool, polyester mixtures, silk ••
hot - cotton, linen •••/max
do not iron
NOTE: If the instructions on the fabric label differ from this guide, follow the instructions on the label
FILLING
You may use the iron with tap-water, however if you live in a hard water area, you should use
distilled water (not chemically descaled or softened water).
If you buy distilled water, check it is marked as suitable for use in irons.
• Unplug the iron from the wall power outlet.
• Set the steam control to
no steam.
• Lift the top of the water inlet cover to open it.
• Hold the iron with the soleplate horizontal.
• Fill slowly, to let the air in the tank escape, otherwise you will cause an air lock and the water
may overow.
• Do not ll past ‘max’, or water may spill whilst in use.
• Wipe up any spillage.
6
5. To iron without steam (dry iron), it is not necessary to empty the
water tank. Simply slide the Variable Steam Selector all the way to
the left to the Dry Iron setting.
6. When finished ironing, turn the Steam Selector to the Off/Dry
Iron setting and set the Temperature Control Dial to the minimum
temperature setting. Unplug from the outlet.
7. Stand the iron on its heel rest and allow it to completely cool off
before storing.
SETTING GUIDE
For best results follow manufacturer’s garment care tags for
recommended heat and steam setting instructions.
Setting number Setting name Setting
Description
Icons
- - Do not Iron
1 Synthetic Low Heat and
No Steam
or
2 Nylon and Silk Low Heat and
No Steam
or
3 Polyester Medium Heat
and No Steam
or
4 Blend Medium Heat
and Light Steam
5 Wool High Heat and
Medium Steam
6 Cotton and Linen High Heat and
High Steam
ADDITIONAL FEATURES
Burst of Steam
Generate extra steam momentarily by pressing the Burst of Steam button.
Use on fabrics suitable for steaming in either the vertical
or horizontal position. For best performance, allow several seconds
between bursts.
Spray Mist
Press the Spray Mist button to generate a light spray of water.
Spray Mist is used to dampen tough wrinkles while dry or steam ironing.
Do not spray silk.
6
5. To iron without steam (dry iron), it is not necessary to empty the
water tank. Simply slide the Variable Steam Selector all the way to
the left to the Dry Iron setting.
6. When finished ironing, turn the Steam Selector to the Off/Dry
Iron setting and set the Temperature Control Dial to the minimum
temperature setting. Unplug from the outlet.
7. Stand the iron on its heel rest and allow it to completely cool off
before storing.
SETTING GUIDE
For best results follow manufacturer’s garment care tags for
recommended heat and steam setting instructions.
Setting number Setting name Setting
Description
Icons
- - Do not Iron
1 Synthetic Low Heat and
No Steam
or
2 Nylon and Silk Low Heat and
No Steam
or
3 Polyester Medium Heat
and No Steam
or
4 Blend Medium Heat
and Light Steam
5 Wool High Heat and
Medium Steam
6 Cotton and Linen High Heat and
High Steam
ADDITIONAL FEATURES
Burst of Steam
Generate extra steam momentarily by pressing the Burst of Steam button.
Use on fabrics suitable for steaming in either the vertical
or horizontal position. For best performance, allow several seconds
between bursts.
Spray Mist
Press the Spray Mist button to generate a light spray of water.
Spray Mist is used to dampen tough wrinkles while dry or steam ironing.
Do not spray silk.
6
5. To iron without steam (dry iron), it is not necessary to empty the
water tank. Simply slide the Variable Steam Selector all the way to
the left to the Dry Iron setting.
6. When finished ironing, turn the Steam Selector to the Off/Dry
Iron setting and set the Temperature Control Dial to the minimum
temperature setting. Unplug from the outlet.
7. Stand the iron on its heel rest and allow it to completely cool off
before storing.
SETTING GUIDE
For best results follow manufacturer’s garment care tags for
recommended heat and steam setting instructions.
Setting number Setting name Setting
Description
Icons
- - Do not Iron
1 Synthetic Low Heat and
No Steam
or
2 Nylon and Silk Low Heat and
No Steam
or
3 Polyester Medium Heat
and No Steam
or
4 Blend Medium Heat
and Light Steam
5 Wool High Heat and
Medium Steam
6 Cotton and Linen High Heat and
High Steam
ADDITIONAL FEATURES
Burst of Steam
Generate extra steam momentarily by pressing the Burst of Steam button.
Use on fabrics suitable for steaming in either the vertical
or horizontal position. For best performance, allow several seconds
between bursts.
Spray Mist
Press the Spray Mist button to generate a light spray of water.
Spray Mist is used to dampen tough wrinkles while dry or steam ironing.
Do not spray silk.
6
5. To iron without steam (dry iron), it is not necessary to empty the
water tank. Simply slide the Variable Steam Selector all the way to
the left to the Dry Iron setting.
6. When finished ironing, turn the Steam Selector to the Off/Dry
Iron setting and set the Temperature Control Dial to the minimum
temperature setting. Unplug from the outlet.
7. Stand the iron on its heel rest and allow it to completely cool off
before storing.
SETTING GUIDE
For best results follow manufacturer’s garment care tags for
recommended heat and steam setting instructions.
Setting number Setting name Setting
Description
Icons
- - Do not Iron
1 Synthetic Low Heat and
No Steam
or
2 Nylon and Silk Low Heat and
No Steam
or
3 Polyester Medium Heat
and No Steam
or
4 Blend Medium Heat
and Light Steam
5 Wool High Heat and
Medium Steam
6 Cotton and Linen High Heat and
High Steam
ADDITIONAL FEATURES
Burst of Steam
Generate extra steam momentarily by pressing the Burst of Steam button.
Use on fabrics suitable for steaming in either the vertical
or horizontal position. For best performance, allow several seconds
between bursts.
Spray Mist
Press the Spray Mist button to generate a light spray of water.
Spray Mist is used to dampen tough wrinkles while dry or steam ironing.
Do not spray silk.
Loading ...
Loading ...
Loading ...