Loading ...
Loading ...
Loading ...
8
SuperFreeze
SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control
and will make the compressor operate continuously. It is not necessary to adjust the thermostat
setting when using this function. When the function is selected, the SuperFreeze indicator will be
ON. The function can be exited by pressing the key again and the indicator will turn OFF.
SuperFreeze will turn off automatically after 8 hours.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is located at the right lower corner of the display. The indicator light will be on
when a multi-key function is selected. To perform a multi-key function, press and hold the first key,
then press the second key for at least 5 seconds and then release both keys
.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the SuperFreeze key for
5 seconds.
Setting the Temperature Control
• The unit has two separate temperature zones. You can set the temperature of the right zone
(refrigerator) by touching the UP and DOWN symbols and the temperature of left zone (freezer)
is controlled automatically. When you push either of the two buttons for the first time, the LED
readout will show the original temperature set previously. (The temperature preset at the factory
is 38°F, or 3°C)
• The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
• The range of the temperature control is from 36°F to 43°F.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the right
zone (refrigerator) will reappear in the display window.
Interior Light
The unit is equipped with an interior LED light which will be turned ON when a door is opened.
NOTE:
• If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
• When you use the unit for the first time or restart the unit after it has been shut off for a long time,
there could be a few degrees variance between the temperature you select and the one indicated
on the LED readout. This is normal and is due to the length of the activation time. There should
not be a problem once the unit has been running for a few hours.
Loading ...
Loading ...
Loading ...