Loading ...
Loading ...
Loading ...
7
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevents
overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the
appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the
receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
INSTALLING THE STAINLESS STEEL HANDLES
This appliance includes two stainless steel handle that are not
required to operate the unit. To install each handle, follow the
instructions below:
1. Remove the door gasket
○
2
2. Install the handle
on the side you wish to install the
handle - you can see two holes designated for handle
installation.
○
4 tightly as shown here with two screws
○
1
and flat washers
○
3
3. Replace the door gasket.
provided.
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 44º and
90ºF (7º to32ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The operating temperature range may not be
reached.
CONTROL PANEL
ON/OFF Power
To turn the appliance ON or OFF, press and hold the POWER key
for 5 seconds.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
Loading ...
Loading ...
Loading ...