Loading ...
Loading ...
Loading ...
30 / English
Front-Loading Automatic Washer
Operating Instructions
• Before washing a single or a few items such as a pillow, a teddy
bear, a single or a pair of shirts, sweat shirts etc, put some
additional items in the drum for better load distribution and spinning.
• Make sure that there is no clothing obstructing the door or caught
between the door and rubber seal.
• Push the loading door firmly and make sure that the door has been
closed properly (especially if you load the washer with full load or
big items).
• In case the door is not locked, door led remains off. In that case,
door should be opened and closed again firmly until the door led
lights up.
• If the door is not closed completely, the machine will not start. This
is a safety precaution. The front door is locked until end of the
washing program and it can not be opened untill the door led on the
panel is off following the end of the program.
• Unload the washed items just after the program cycle has finished.
Delay of unloading may cause wrinkling and unwanted odor on
laundry.
• Check to see any small metal items such as pins, coins etc left in
rubber seal while unloading the washer. Any residual metal items
may cause rusting on the rubber seal.
• If there is any water left in rubber seal, remove with a soft cloth.
Detergent Use
About Detergent
C
CAUTION
• Your washer is designed to use only HE (high efficiency)
detergents. You should always look for the following symbol on
the label of detergents:
If you use a non-HE detergent with this washer, high sudsing will
occur. High sudsing will decrease tumble action effectiveness,
washing and rinsing performance worsen. Suds may flow out of
detergent dispenser giving damage to your washer.
Loading ...
Loading ...
Loading ...