Loading ...
Loading ...
Loading ...
4
US
Before setting up your TV
Some TV models are packaged with a detached Table-Top
Stand so you can mount your TV to a wall right away. See
page 17 (Installing the TV to the Wall) if you want to mount
the TV to a wall. If you are not mounting the TV to a wall,
you will ne
ed to attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the supplied screws
to complete the task. Look for the supplied Startup Guide.
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
siz
e TVs require two or more people.
• Correct hand placement while carrying the TV is very
im
portant for safety and to avoid damage.
• Ensure your TV has adequate ventilation, see page 19.
• For best picture quality, do not expose the screen to direct
illum
ination or sunlight.
• Avoid installing the TV in a room with reflective wall and
floor m
aterials.
• Avoid moving the TV from a cold area to a warm area.
Sudden r
oom temperature changes may cause moisture
condensation. This may cause the TV to show poor
picture and/or poor color. Should this occur, allow
moisture to evaporate completely before powering the TV
on.
Securing the TV
Sony strongly recommends taking
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result
in pr
operty damage, serious bodily
injury or even death.
Preventing the TV from Toppling
• Secure the TV to a wall and/or stand.
• Do not allow children to play or climb on furniture and TV
se
ts.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
slipper
y, unstable and/or uneven surfaces.
f
urniture that can easily be used as steps, such as a
chest of drawers.
• Install the TV where it cannot be pulled, pushed or
knock
ed over.
• Route all AC power cords and connecting cables so that
t
hey are not accessible to curious children.
Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of
the TV. Use two angle braces (not supplied) to secure
the stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
su
pplied):
• M6 machine screws (screwed into the TV’s rear cover)
• A screw or similar (attach it to the Stand)
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
The length of the M6 machine screw differs depending on
th
e rope or chain diameter. Please see below illustration.
Angle brace
(not supplied)
Stand
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
Screw (not supplied)
10-12 mm
Screw M6
Rope or chain
TV’s rear cover
Loading ...
Loading ...
Loading ...