Loading ...
Loading ...
Loading ...
Normal:When this mode is selected, the fan will operate as normal, in the settings
selected.
Natural: This mode cycles through Low, Medium, High for 15 seconds each.
Sleep: The sleep mode varies depending on what speed the fan is working in at the
time of selection. Refer to the below examples:
Low Speed - the fan will work at this speed without change until it is
turned o (either manually or by the timer).
Medium speed - the fan will work at medium speed for 30 minutes, then
switch to low speed until it is turned o.
High Speed - the fan will work at high speed for 30 minutes, then switch
to medium speed for 30 minutes, and nally work in low speed be-fore
it is turned o.
Child: The timer sets at 3 hours and oscillation starts. The fan will work at high speed
for 15 minutes, before changing to medium speed for 15 minutes, and then nishing
in low speed until it automatically turns o. NOTE: The oscillation function can be
turned o manually and it won't interrupt the Child mode settings.
Operation
1. Place the fan on a at stable surface. Plug into an electrical outlet and press the
“Power On/O” button to turn the unit “On”. The current room temperature will
show on the LED display.
2. Adjust the fan speed by pressing the “Speed” button. There are three speeds -
Low, Medium & High and each press will cycle through the speed settings. The
speed setting will show on the LED display.
3. Press the “Mode” button to cycle through, Normal, Natural, Sleep & Child modes.
The indicator light of the chosen mode will illuminate on the LED display.
4. This unit has a 12 hour timer that can be set in 1 hour increments. Press the
“Timer” button until the desired time is shown on the LED display.
5. Press the “Oscillation” button to enable oscillation. Press again to disable.
Modes
10
Loading ...
Loading ...
Loading ...