Loading ...
Loading ...
Loading ...
3. Checkif therangeislevelbyinstallinganovenrack
inthecenteroftheovenandplacingalevelonthe
rack(Figure9).
4. Take2readingswiththelevelplaceddiagonallyin
onedirectionandthentheother.Leveltherange,if
necessary,byadjustingthelevelinglegs.
5. Iftherangecannotbelevel,contactacarpenterto
correctsaggingorslopingfloor.
| Decorative
(if required)
1.
2.
3.
4.
,
,
7.
8.
,
Rear Trim Installation
Disconnect the power from the range.
Make sure the range is leveled.
Pull range toward you.
Take the distance between the floor and the surface
underneath the cooktop frame.
Mark that distance on the wall where the decorative
trim will be installed.
Draw a line.
Place the top of the decorative trim under that line.
Using the screws provided fix the decorative trim into
the wall.
Slide the range back into position and reconnect the
power source (the bottom of the cooktop should be
located over the decorative trim).
-- ..... " Decorative Trim
Leveling
Font
Leveling
Leg
_ LOWER
_ RAISE
Figure 8
Models Equipped with Leveling Leg_s
the range and set cooktop height before
installation in the cut-out opening.
1. Install an oven rack in the center of the oven.
2. Place a level on the rack (see Figure 9). Take 2
readings with the level placed diagonally in one
direction and then the other. Level the range, if
necessary, by adjusting the 4 leg levelers with a
wrench (see Figure 14).
3. Taking care to not damage the countertop, slide
range into cutout opening and double check for
levelness.
Screw (3)
Distance betwei
the floor and
the surface
underneath the
cooktop frame,
Figure 10
Figure 9
9
Loading ...
Loading ...
Loading ...