User Manual - Page 313

For TRD.

Loading ...
Loading ...
Loading ...
311
4-5. Using the driving support systems
4
Driving
TUNDRA_OM_USA_OM0C025U_20MY
n Conditions under which the Blind Spot Monitor function may not func-
tion correctly
l The Blind Spot Monitor function may not detect vehicles correctly in the fol-
lowing conditions:
During bad weather such as heavy rain, fog, snow, etc.
When ice or mud, etc., is attached to the rear bumper
When driving on a road surface that is wet due to rain, standing water,
etc.
When there is a significant difference in speed between your vehicle and
the vehicle that enters the detection area
When a vehicle is in the detection area from a stop and remains in the
detection area as your vehicle accelerates
When driving up or down consecutive steep inclines, such as hills, a dip
in the road, etc.
When multiple vehicles approach with only a small gap between each
vehicle
When vehicle lanes are wide, and the vehicle in the next lane is too far
away from your vehicle
When the vehicle that enters the detection area is traveling at about the
same speed as your vehicle
When towing anything such as trailer, boat, etc.
When there is a significant difference in height between your vehicle and
the vehicle that enters the detection area
Directly after the BSM function is set to on
When towing a trailer
When items such as a bicycle carrier are installed on the rear of the vehi-
cle
l Instances of the Blind Spot Monitor function unnecessarily detecting a vehi-
cle and/or object may increase under the following conditions:
When there is only a short distance between your vehicle and a guardrail,
wall, etc.
When there is only a short distance between your vehicle and a following
vehicle
When vehicle lanes are narrow and a vehicle driving 2 lanes across from
your vehicle enters the detection area
When items such as a bicycle carrier are installed on the rear of the vehi-
cle
Loading ...
Loading ...
Loading ...