User Manual - Page 6

CARE AND CLEANING

Condenser cleaning

The condenser is like the radiator on a car, it has fins and tubes that can become clogged with dirt and lint.

To clean:

1. Remove the kickplate and front service panel.

2. Locate the condenser surface.

3. Vacuum the surface, removing all dust and lint.

4. Return the kickplate and front service panel to their

4. Drain the water reservoir by removing the rubber cap under the reservoir - it's near the back wall of the ice storage bin.

5. Disconnect the incoming water line at the inlet water valve.

6. Open the door, push and release the on/off switch to turn the machine on.

7. Blow air through the inlet water valve; a tire pump could do the job.

8. Drain pump models should have about 1/2 gallon of RV antifreeze (propylene glycol) poured into the ice storage bin

drain.

9. Switch off and unplug the machine.