Loading ...
Loading ...
Loading ...
en
16
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice – even if the appliance is still under
guarantee!
Fault Possible cause Remedial action
Temperature differs greatly
from the set value.
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has
approached the set value.
If the temperature is too low check
the temperature again the next day.
The light does not work. The bulb is defective. Replace bulb. Fig. +/B
1. Switch the appliance off.
2. Pull out mains plug or switch off fuse.
3. Remove bulb cover from the rear.
4. Change the bulb.
(Replacement bulb: 220–240 V a.c., E14
bulb holder, see defective bulb for
wattage.)
Light switch is jammed. Check whether it can be moved. Fig. +/A
Bottom of the refrigerator
compartment is wet.
The condensation channel
or drainage hole are blocked.
Clean the condensation channel
and the drainage hole. See chapter Cleaning
the appliance. Fig. #
The refrigerating unit
is switching on more
frequently and for longer.
Appliance opened
frequently.
Do not open the appliance unnecessarily.
The ventilation openings
have been covered.
Remove obstacles.
Large quantities of fresh
food are being frozen.
Do not exceed max. freezing capacity.
Loading ...
Loading ...
Loading ...