Loading ...
Loading ...
Loading ...
Safety features of your vehicle
83
Recalling positions from memory
1.The shift lever should be in P
(Park) when :
- The ignition switch is in ON or
engine is running.
- It is less than 20 minutes after the
driver's door is opened with the
ignition switch in OFF or ACC.
- It is less than 30 seconds after
the driver's door is closed with
the ignition switch in OFF or
ACC.
2.To recall the position in memory,
press the desired memory button
(1 or 2). The system will beep
once, then the driver seat, outside
rearview mirror and steering
wheel will automatically adjust to
the stored positions.
3. "Driver 1 (or 2) set is changed" will
appear on the instrument cluster
LCD display.
Adjusting the control switch for the
driver seat while the system is recall-
ing the stored position will cause the
movement to stop and move in the
direction that the control switch is
moved.
Use caution when recalling adjust-
ment memory while sitting in the
vehicle. Push the seat position con-
trol knob to the desired position
immediately if the seat moves too far
in any direction.
Easy access function
With the shift lever in the P position,
the system will move the driver's seat
automatically as follows:
• It will move the driver’s seat rear-
ward when the engine start/stop
button is turned to the OFF position.
• It will move the driver’s seat forward
when the engine start/stop button is
turned to the ACC or START posi-
tion.
You can activate or deactivate this
feature. Refer to "User settings" in
chapter 4.
Loading ...
Loading ...
Loading ...