Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct di-
mensions. Refer to "Technical
data".
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 seconds.
If comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is in-
correct.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZITN646K PNC 949 492 459 00
Typ 60 GAP D5 AU 220 - 240 V 50 - 60 Hz
Induction 3.0 kW Made in Romania
Ser.Nr. ................. 3.0 kW
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost maxi-
mum duration
[min]
Cookware diame-
ter [mm]
Left front 2300 2800 10 180 - 210
12
Loading ...
Loading ...
Loading ...