Model Number:
CH600
CH600+
CH800
CH820+
Model: 6C8S
Potential risks warning:
a. Do not expose power tools to rain or wet conditions, as water
entering the power tool increases the risk of electric shock.
b. Do not let familiarity from frequent tool use make you complacent
and overlook tool safety principles, careless behavior can cause
serious injury in a matter of seconds.
c. Keep handles and gripping surfaces dry, clean, free of grease,
slippery handles and gripping surfaces are not safe for handling and
controlling tools in unexpected situations.
d. Have your power tools serviced by qualified technicians using only
the same replacement parts, this will ensure the safety of your power
tools.
02
03
04
05
CH820+
2.35kg
（5.18lbs）
4000mAh
3-4 hours
30-40min
06
6m/s
07
08
09
Adjusting Chain Tightness
New chains will be stretched at the beginning of use. Please check
and adjust to the proper tension frequently, as a loose chain can easily
derail, which may lead to rapid wear of the chain and guide plate.
If the chain loosens during use, the chain should be adjusted as
follows：
1)Loosen the nuts on the chain
cover slightly.
2)Adjust the chain tension with
a screwdriver. (Note: twist the
adjusting screw clockwise to
tighten the chain, and twist
counterclockwise to loosen it)
3)2-3 mm of a gap when you lift
an individual link out of the bar
4)Tighten the nuts on the chain
cover securely.
10
Note:After use, please pour out
the oil in the mailbox of the chain
saw to avoid chain saw oil leakage
affecting the use of the chain saw.
11
12
Troubleshooting
For any problems you cannot solve, please feel free to contact our
after-sales mail [email protected]. We'll be happy to solve your
problem.
Battery specifications, risk warning, charging instructions:
Only use our charger; Charger voltage must not exceed battery voltage;
Use 21V charger for 21V battery.
13
Malfunction status Cause Action
Motor stops,
chainsaw won't
start
Without electricity
Check whether the
battery pack has power
Chainsaw stuck
when cutting
Low battery
Fully charge the battery
before using it
Unable to charge
Charger keeps
green light
Battery charging
protection(>45°c)
Keep the battery in
shade for 30-60 minutes
before using it again
Battery charging
protection(>45°c)
Keep the battery in
shade for 30-60 minutes
before using it again
Chain bar
overheating
Insufficient lubrication
of chain & bar
Add chain & bar oil
Inefficient saw
cutting
Blunt chain
use a 5/32"(4.0mm) file
to sharpen the chain
Loose chain Check chain tightness
Incorrectly chain
direction
Check whether the
installation direction of
the chain is consistent
with the instruction
Insufficient lubrication
of chain & bar
Add chain & bar oil
Motor overheat
protection(>120°c)
Keep the chainsaw in
shade for 30-60
minutes before using it
again
Battery overheat
protection(>70°c)
Keep the battery in
shade for 30-60
minutes before using it
again
14
15
16
Information on UK importer and manufacturer
Name or trade mark of the UK importer: APEX CE SPECIALISTS
LIMITED
Full postal address of the UK importer: 89 Princess Street,
Manchester, M1 4HT,UK
TEL:441616371080 E-MAIL:[email protected]
0EM name or trade mark: Zhejiang Mingli Industry and Trade Co., Ltd.
OEM's full postal address: Workshop No. 11, Intelligent Manufacturing
Small and MicroEnterprise Pioneer Park, Wuyi County, Quanxi Town,
Wuyi County Jinhua City, Zhejiang Province
Declaration of Conformity
We declare that the product described above, to which this declaration
of conformity refers to, is in conformity with the relevant Union
harmonization legislation: -EMC directive 2014/30/EU
17
SeeSii Other contact info:
Facebook : @SeeSiiOfficial
OR Scan Below:
Instagram: @seesii_official
Youtube: @SeesiiOfficial
18
