Bousnic Dog Training Guide
Basic Obedience Training with Bousnic E-Collar
Bousnic INC
1
@Bousnic [email protected]
Contents
Dog training collar introduction 3
Find the best stimulation level for your pet 4
Teaching basic obedience 5
The “Sit” comm and 5
The “Come” com m and 6
The “St ay” comm an d 7
Eliminating unwanted behavior 7
Ju m pi n g u p 7
Di g gi n g 8
Ch as i ng 9
Trash raiding 10
General t ips 11
Terms of use and limitation of liability 12
Term s of u se 12
No Unlawful or prohibited use 12
Limitation of liability 12
Modification of terms and conditions 12
Frequently Asked Questions 13
Troubleshooting 15
2
Dog Training Collar Introduction
Whether training companion, working, or sport dog, we all want a happy and willing
puppy that responds quickly to commands at a distance and under distraction. Your new
Bousnic collar is a powerful training tool that can help you reach that goal.
Bousnic electronic training collar (e-collar) is a safe, reliable, and effective training tool.
With it, you can make perfectly timed corrections even at great distances. In addition, the
adjustable intensity feature allows you to match the stimulation of the training collar to
your dog’s temperament and the distraction level of the moment for maximum training
efficiency. However, correcting to stop unwanted behavior is only a fraction of what you
can do with your e-collar.
Here is an example of a dog training collar that consists of the Remote Transmitter and
Receiver Collar:
3
Bousnic e-collar can be a powerful tool for encouraging desired behavior. But first, you
must identify an e-collar intensity setting for your dog that is high enough to be noticed
but not so high as to be disruptive. Then, your dog must learn to act in response to the
e-collar and that he can, by his actions, control it.
You will find this method of e-collar training is even gentler than many traditional
leash-training methods. Additionally, the e-collar improves communication by provid-
ing instant feedback to your dog during training. This reduces confusion, fosters a pos-
itive training attitude, and accelerates learning, rapidly producing off-leash reliability.
Even if your dog already knows the basic obedience commands, follow the procedures
given. Your dog must learn how to respond to the e-collar for each command before you
can use your Bousnic collar for training at a distance.
Find the Best Stimulation Level for Your Pet
Important: Start with the vibration mode first & use the static shock mode as a last resort.
Based on the model, the Remote Trainer can have anywhere from 1 to16 different
stimulation levels. This allows you to choose the level that is best for your pet. Once you
have placed the Receiver Collar on your pet, it is time to find the Stimulation Level that is
best for him. This is called the Recognition Level. A slight change in your pet’s behavior,
such as looking around in curiosity, scratching at his collar, or flicking his ears, indicates
the Recognition Level that is best for him.
Follow the steps below to find your pet’s Recognition Level:
1.Starting at the Lowest Level of stimulation on the Remote Display, press the Vibration
or Shock Stimulation Button continuously (further referred to as an [S] button).
2.If your pet shows no reaction, repeat the Stimulation Level several times before
moving up to the next level.
3.YOUR PET SHOULD NOT BARK OR PANIC WHEN RECEIVING STIMULATION.
IF THIS HAPPENS, THE STIMULATION LEVEL IS TOO HIGH AND YOU NEED
TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS.
4
4.Move up through the Stimulation Levels until your pet reliably responds to the stim-
ulation.
5.If your pet continues to show no response at the Highest Level, check the fit of the
Receiver Collar. If your pet has long or thick fur, use the longer set of Contact Points.
Then go back to step 1 and repeat the process. If this still does not yield any results, your
pet’s hair will need to be trimmed around the Contact Points.
Teaching Basic Obedience
The “Sit” Command
1.Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and
attach a 10-foot leash. Note: Be sure the extra collar does not put pressure on the Contact
Points.
2.Hold the leash and the Remote Transmitter in one hand. Keep your other hand free to
guide your pet into a “Sit” position.
3. Press and hold the [S] Button, starting at your pet’s Recognition Level.
4. Immediately give the “Sit” command while continuing to hold the [S] Button.
5. Release the [S] Button as soon as your pet is in position, and praise him.
6. Release your pet from the “Sit” command and play.
7. Repeat Steps 2 through 6.
Note: If your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your pet
close to you while teaching the “Sit” command.
5
The “Come” Command
1.Put a separate, non-metallic collar on your
pet’s neck ABOVE the Receiver Collar, and
attach a 10-foot leash.
Note: Be sure the extra collar does not put
pressure onthe Contact Points.
2.Hold your leash in one hand and the Remote
Transmitter in the other.
3.Wait for your pet to walk away from you.
Using the Recognition Level for your pet, press
and hold the [S] Button on your Remote.
4.Immediately give the command “Come”
while continuing to hold the [S] Button.
5.Using the leash, gently guide your pet toward
you until he begins to come in your direction.
6. Immediately release the [S] Button as soon as your pet steps towards you, and praise
him enthusiastically.
7.Quickly move backwards as your pet begins to come
back to you, praising him the entire time.
8. Praise your pet when he returns to you.
9. Repeat Steps 3 through 8.
10.Once your pet responds readily to the “Come”
command several times, back away from him without
giving a command. When your pet turns toward you, give
the “Come” command (WITHOUT STIMULATION) and
praise him while you continue to back up. Praise your pet
when he returns to you.
11.Use your leash to prevent your pet from running past you. If your pet manages to run
past you, repeat Steps 3 through 8.
6
The “Stay” Command
1.Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and
attach a 10-foot leash. Note: Be sure the extra collar does not put pressure on the Contact
Points.
2.Put your pet on his bed or on a cooling mat. Hold your leash in one hand and the
Remote Transmitter in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say anything to your pet.
4.If your pet tries to leave the bed, press and hold the [S] Button and give the “Stay”
command. Continue to hold the button until your pet is back on his bed. If necessary, use
the leash to guide your pet onto his place.
5. Praise your pet when he is back on his bed. You are welcome to use treats.
6. Once your pet has settled for a few seconds, release him and play calmly.
7. Repeat steps 1 through 5.
Eliminating Unwanted Behavior
Jumping Up
Pets typically jump up to get attention. If you do not want your pet to jump on you, then
friends or members of the family should not encourage this behavior. That means every
time your pet jumps on someone, he should be reprimanded or redirected to an alternate
and acceptable behavior, for which he can receive praise.
Note: It is best if your pet first understands the “Sit” command.
1.Choose your pet’s Recognition Level.
2.As soon as your pet lifts his paws off the ground to jump on you, press the [S] Button
and give the command “Sit.”
7
• Release the [S] Button immediately once your pet is sitting, and verbally praise him.
• If your pet ignores the stimulation, increase the Intensity Level.
• Practice this exercise in several diff- erent areas and use different people for
distractions.
Digging
It is important to first understand why your pet is digging. Many dogs, such as terriers,
were bred to flush out prey, and digging is very natural to them. Other dogs may be
digging to find a cool spot to lay down, or simply out of boredom. Your pet may no longer
have the desire to dig if he is provided with the following:
• A cool, shaded area in which to lay down, and plenty of water.
• An alternate activity, such as a favorite toy.
• Plenty of play, exercise, and attention.
• A yard free from rodents or prey that your dog may be trying to find.
1.Choose the Intensity Level 1 higher than your pet’s Recognition Level.
2.Place the Receiver Collar on your pet and wait at least 10 minutes before placing him in
the yard. No other people or pets should be in the yard, as you do not want your pet to
associate the stimulation with anything other than his digging. Your pet must be securely
fenced in or contained during training.
3.From a window or area where your pet cannot see you, wait until your pet begins to dig.
8
4.While your pet digs, press the [S] Button and release it when he stops digging. Only
press the button while your pet is in the act of digging, and do not say anything to him.
5. If your pet ignores the stimulation, increase the Intensity Level.
6. Continue to watch your pet, as he may choose another area to dig.
7.Do not allow your pet in the yard unsupervised until he has completely stopped
digging.
Chasing
Chasing is an instinctive behavior stimulated by moving objects. Some dogs have a
particularly strong desire to chase that can put them in harm’s way and leave you
helpless. Never allow your dog off the leash or out of a contained area until he has learned
the “Come” command, regardless of the distraction. Be consistent and correct your
dog every time he chases something.
CAUTION! It is vitally important that you and your dog remain safe while learning
during on-leash training. Your dog should be on a strong leash, long enough for him to
attempt to chase an object, but short enough for him not to reach a road or other unsafe
area. You must also be physically strong to restrain your dog when he tries to chase.
1.If your dog has not learned the “Come” command, keep a leash on him so you can
physically stop him before he reaches the object he is chasing.
2. Choose the Intensity Level 1 higher than your dog’s Recognition Level.
3.Set up a scenario where your dog is enticed to chase an object. Common items could
be cars, motorcycles, bicycles, etc. (do not use toys).
4.When the object passes in front of your dog, make sure to hold the leash with a firm
grip. As soon as your dog begins to chase the object, press and hold the [S] Button until
he stops.
9
5.When your dog stops chasing the object, immediately release the button, walk back-
wards and give the “Come” command. Praise your dog as he comes to you.
6. Repeat the process until your dog stops chasing the object.
Trash Raiding
The easiest way to prevent trash raiding is to remove garbage and tempting food from
your pet’s environment. You can use the Remote Trainer to teach your pet to stay away
from these items; however, you must be prepared to correct your pet every time he
approaches them.
1.Choose the Intensity Level 1 higher
than your pet’s Recognition Level.
2.Pick a temptation for your pet and
position yourself where he cannot see you.
3.While your pet’s mouth is touching the
temptation, press and hold the [S] Button.
Immediately release the button when your pet leaves the temptation.
4.Do not say anything, as you want your pet to associate the stimulation with his
behavior, not you.
5.If your pet does not respond to the stimulation, increase the Intensity Level by 1 and
repeat the process.
6. Repeat this process in several different locations with different temptations.
10
General Tips
•Bousnic Dog Training Collar is not design to be wor n con stantly. We
recommend you to limit collar usage just for active Training Sessions. Always take
off the collar when you leave your dog unattended.
•Most dogs will feel uncomfortable when wearing collar for the first time. Don’t
use any commands until your dog has gotten used to the collar which will
normally take several days.
•Eliminate one unwanted action or teach one obedience command at a time. If you
move to quickly with training, your dog may become confused.
•Be consistent in your training. Give your dog the same stimulation for each
unwanted action. We suggest you to use Vibration Stimulation before starting the
Static Shock Stimulation. If you follow this training method, your dog will
learn that Static Shock Stimulation might come after Vibration. Hence, the
Vibration Stimulation alone can effectively cure unwanted behavior of your dog.
•Do not overcorrect. Use as few stimulation as possible to train your dog.
•Following a predefined scenario in all Training Sessions can dramatically improve
your chances of success.
•Should your dog react to the training by hiding or reacting fearfully, redirect his
attention to a simple command such as “Speak” or “Sit” to calm him down. Use
treats to help your dog understanding what commands have been done correctly.
11
Terms of Use and Limitation of Liability
Terms of Use
This Product is designed to be used with dogs where training is desired. The
specific temperament of your dog may not work with the product. We do not
recommend you to use this product if your pet is less than 8 lbs or under 6 months
old, or if your pet is aggressive. If you are unsure whether this is appropriate for your
pet, please consult your veterinarian, or a certified trainer. Proper use includes
reviewing the entire User Manual and Dog Training Guide provided with the
product. Pay extra attention to all Caution statements.
No Unlawful or Prohibited Use
This Product is designed for use with dogs only. Bousnic dog training collar is not
intended to harm, injure, or provoke. Using this product in a way that is not
intended could result in violation of Federal, State or local laws.
Limitation of Liability
In no event shall we be liable for any direct, indirect, punitive, incidental, special or
consequential damages, or any damages whatsoever arising out of or connected
with the use or misuse of this Product. Buyer assumes all risks and liability from
the use of this Product.
Modification of Terms and Conditions
We reserve the right to change the terms, conditions and notices under which
this Product is offered.
12
Frequently Asked Questions
Q: Is the static safe for my pet?
A: The static electricity of this collar is safe for your pet, please feel safe.
Please select the appropriate static electricity level.Electronic training
equipment requires the interaction and training of the owner.
Q: How old does my pet have to be before using the electronic training
collar?
A:Your pet should be able to recognize basic obedience commands such
as"Sit"or "Stay".Pets should be at least 6 months old before using the
training collar.
Q: Once my pet is trained and has been obeying my commands, will he
have to continue to wear the receiver collar?
A:It is recommended to wear it until you completely correct the dog's bad
behavior.
Q: Is the receiver collar waterproof?
A: Yes,the receiver collar is IPX7 waterproof. But the remote is not
waterproof. Please keep the remote away from water.
Q: WillI get exactly 1000 feet of range with the electronic training
collar?
A: The effective wireless communication range will be affected by terrain,
weather, vegetation, and interference from other radio equipment.
Q: How can I get support when I have product problems?
A: Please feel free to contact our official customer service mailbox, any
problems about the product will be resolved here: support@bousnic.com
13
Q: Once my pet is trained does he have to continue to wear the collar?
A: You might have to reinforce training with the collar from time to time.
Q: How long can I continuously deliver Vibration or Static Shock to my pet?
A: The max amount of time you can deliver the Vibration or Static Shock to you
dog continuously should be no more than 10 seconds.
IMPORTANT: While it is fine to use the Vibration for up to 10 seconds, it
is highly recommended to limit the continuous Static Shock delivery to no
more than 3 seconds (the smaller the dog the shorter it should be).
Q: What should I do if my dog’s neck becomes red and irritated?
A: Stop using the product immediately for at least 48 hours. If the condition
persists beyond 48 hour please consult your veterinarian.
Q: Can I attach a leash to the Receiver collar?
A: No, this can result in pulling the contact points to tightly against your
dog’s neck. Use a separate collar when needed.
Q: How long can I leave a Receiver Collar on my dog?
A: The Collar is not design to be worn continuously. We recommend the Collar
to be worn only during training sessions or other outdoor activities.
Q: How long should the training session be?
A: Training sessions should be kept short and positive (10-15 minutes).
Bousnic INC
14
Troubleshoting
No shock function /My pet does not respond when I press a button.
1.Make sure the Contact points or the Contact Spring Sheet is in contact with
the dog's skin and not blocked by hair.
2.Make sure the Receiver Collar has been turned on.
3.If the range has reduced from the first time you used the Remote Training
Collar, the battery(s) may be low in either the Remote or Receiver Collar.
4.The distance between the transmitter and the receiver is too far,or blocked by
metal objects.
5.Test the Receiver Collar. Refer to "Function Test"for details.
6.Increase the Shock Level.Maybe the level is too low for the dog to feel.
The Receiver Collar will not turn on.
1.Make sure the Receiver Collar has been charged. For the initial charge, be
sure to charge it for 4 hours. Subsequent charges only take 2-3 hours.
2.Check if your receiver is able to take charge. Well pluggedin the charger, see
if the red light on the receiver comes out or turns to green. If the red light
doesn't come out or turn to green, contact support team.
3.Try different outlets or chargers to check if the charging device is workable.
4.If the receiver can be charged normally, help confirm if you can hear the click
when the button is pushed.
The Receiver Collar is not responding to the Remote. 1.Make sure the
Receiver Collar is on.
2.If the Indicator Light does not come on when any button is pressed on the
remote, ensure that the remote is on and has enough batteries.
3.If the first two solutions did not resolve your problem,Refer to"Pair the
Remote and the Receiver Collar".
15
16
The Receiver Collar or The Remote cannot be charged.
1.Check if the output voltage of the adapter or USB port which the charging
cable is connected to is 5V.For the safety, the device won't take charge when
the voltage is higher than 5V.
2.Check if there is dirt or rust in the charging hole, try to clean it.
3.Make sure that the charger and charging cable are not damaged or broken.
4.If the battery is completely consumed and the device is stored for too long,
when recharging, it will take a few more minutes before the decive displays the
charging status.
5.When the temperature is below 0 degrees Celsius, the charging speed will be
slower.
@Bousnic [email protected]
Customer’s satisfaction is always our top priority. Any issues,
please feel free to contact us at any time. We will help you at
our best. Take care and have a good day!
