58 4685 0000/AB
SSM4671P
EN /
Refrigerator
User Manual
Please read this manual before using the product!
Dear Customer,
We'd like you to make the best use of our product, which has been manufactured in
modern facilities with care and meticulous quality controls.
Thus, we advice you to read the entire user manual before you use the product. In
case the product changes hands, do not forget to hand the guide to its new owner
along with the product.
This guide will help you use the product quickly and safely.
• Please read the user guide carefully before installing and operating the product.
• Always observe the applicable safety instructions.
• Keep the user guide within easy reach for future use.
• Please read any other documents provided with the product.
Keep in mind that this user guide may apply to several product models. The guide
clearly indicates any variations of different models.
C
Important information and
useful tips.
A
Risk of life and property.
B
Risk of electric shock.
The product’s packaging
is made of recyclable
materials, in accordance
with the National
Environment Legislation.
A
A
A
C
SUPPLIER’S NAME
MODEL IDENTIFIER
(*)
INFORMATION
C
The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/
3 / 22 EN
Refrigerator/User Manual
1 Safety and environment
instructions 4
General safety ............................................... 4
Intended use ...................................................7
Child safety ......................................................7
Compliance with WEEE Directive and
Disposing of the Waste Product ............ 8
Compliance with RoHS Directive............ 8
Package information ...................................8
2 Your refrigerator 9
3 Installation 10
Appropriate installation location ......... 10
Installing the plastic wedges ................10
Adjusting the feet .......................................11
Electrical connection .................................11
Changing the illumination lamp ...........11
Door Open Warning ....................................11
4 Preparation 13
5 Using your cooler/freezer 14
Cooling ............................................................15
Placing the food .......................................... 15
6 Maintenance and cleaning 16
Avoiding bad odours .................................16
Protecting the plastic surfaces ...........16
7 Troubleshooting 17
4 / 22 EN
Refrigerator/User Manual
1 Safety and environment instructions
This section provides the safety
instructions necessary to prevent
the risk of injury and material
damage. Failure to observe these
instructions will invalidate all
types of product warranty.
Intended use
A
WARNING:
Keep ventilation
openings, in the appliance
enclosure or in the built-
instructure, clear of
obstruction.
A
WARNING:
Do not use mechanical
devices or other means
to accelerate the
defrosting process,
other than those
recommended by the
manufacturer.
A
WARNING:
Do not damage the
refrigerant circuit.
A
WARNING:
Do not use electrical
appliances inside
the food storage
compartments of
the appliance, unless
they are of the type
recommended by the
manufacturer.
This appliance is intended to be
used in household and similar
applications such as
– staff kitchen areas in shops,
offices and other working
environments;
– farm houses and by clients
in hotels, motels and other
residential type environments;
– bed and breakfast type
environments;
– catering and similar non-retail
applications.
1.1. General safety
• This product should not be
used by persons with physical,
sensory and mental disabilities,
without sufficient knowledge
and experience or by children.
The device can only be used by
such persons under supervision
and instruction of a person
responsible for their safety.
Children should not be allowed
to play with this device.
• In case of malfunction, unplug
the device.
• After unplugging, wait at least
5 minutes before plugging in
again.
• Unplug the product when not in
use.
• Do not touch the plug with wet
hands! Do not pull the cable to
plug off, always hold the plug.
• Do not plug in the refrigerator if
the socket is loose.
• Unplug the product during
installation, maintenance,
cleaning and repair.
• If the product will not be used for
a while, unplug the product and
remove any food inside.
• Do not use the product when the
compartment with circuit cards
located on the upper back part of
the product (electrical card box
cover) (1) is open.
5 / 22 EN
Refrigerator/User Manual
Safety and environment instructions
1
1
• Do not use steam or steamed
cleaning materials for
cleaning the refrigerator and
melting the ice inside. Steam
may contact the electrified
areas and cause short circuit
or electric shock!
• Do not wash the product by
spraying or pouring water on it!
Danger of electric shock!
• In case of malfunction, do not
use the product, as it may cause
electric shock. Contact the
authorised service before doing
anything.
• Plug the product into an earthed
socket. Earthing must be done by
a qualified electrician.
• If the product has LED type
lighting, contact the authorised
service for replacing or in case of
any problem.
• Do not touch frozen food with
wet hands! It may adhere to your
hands!
• Do not place liquids in bottles
and cans into the freezer
compartment. They may explode.
• Place liquids in upright position
after tightly closing the lid.
• Do not spray flammable
substances near the product, as it
may burn or explode.
• Do not keep flammable materials
and products with flammable gas
(sprays, etc.) in the refrigerator.
• Do not place containers
holding liquids on top of the
product. Splashing water on
an electrified part may cause
electric shock and risk of fire.
• Exposing the product to rain,
snow, sunlight and wind will
cause electrical danger. When
relocating the product, do
not pull by holding the door
handle. The handle may come
off.
• Take care to avoid trapping any
part of your hands or body in any
of the moving parts inside the
product.
• Do not step or lean on the door,
drawers and similar parts of the
refrigerator. This will cause the
product to fall down and cause
damage to the parts.
• Take care not to trap the power
cable.
1.1.1 HC warning
If the product comprises a cooling
system using R600a gas, take
care to avoid damaging the
cooling system and its pipe while
using and moving the product.
This gas is flammable. If the
cooling system is damaged, keep
6 / 22 EN
Refrigerator/User Manual
Safety and environment instructions
the product away from sources
of fire and ventilate the room
immediately.
C
The label on the inner left
side indicates the type of
gas used in the product.
1.1.2 For models with
water dispenser
• Pressure for cold water inlet shall
be maximum 90 psi (620 kPa).
If your water pressure exceeds
80 psi (550 kPa), use a pressure
limiting valve in your mains
system. If you do not know how
to check your water pressure,
ask for the help of a professional
plumber.
• If there is risk of water hammer
effect in your installation, always
use a water hammer prevention
equipment in your installation.
Consult Professional plumbers
if you are not sure that there is
no water hammer effect in your
installation.
• Do not install on the hot water
inlet. Take precautions against of
the risk of freezing of the hoses.
Water temperature operating
interval shall be 33°F (0.6°C)
minimum and 100°F (38°C)
maximum.
• Use drinking water only.
1.2. Intended use
• This product is designed for
home use. It is not intended for
commercial use.
• The product should be used to
store food and beverages only.
• Do not keep sensitive
products requiring controlled
temperatures (vaccines, heat
sensitive medication, medical
supplies, etc.) in the refrigerator.
• The manufacturer assumes no
responsibility for any damage
due to misuse or mishandling.
• Original spare parts will be
provided for 10 years, following
the product purchasing date.
1.3. Child safety
• Keep packaging materials out of
children’s reach.
• Do not allow the children to play
with the product.
• If the product’s door comprises
a lock, keep the key out of
children’s reach.
1.4. Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive (2012/19/EU).
This product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high
quality parts and
materials which can be
reused and are suitable
for recycling. Do not
dispose of the waste
product with normal domestic
and other wastes at the end of its
service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
7 / 22 EN
Refrigerator/User Manual
Safety and environment instructions
1.5. Compliance with
RoHS Directive
• This product complies with EU
WEEE Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specified
in the Directive.
• Package information
• Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.
8 / 22 EN
Refrigerator/User Manual
2 Your refrigerator
C
Figures that take place in this instruction manual are schematic and
may not correspond exactly with your product. If the subject parts are
not included in the product you have purchased, then it is valid for other
models.
1. Indicator panel
2. Butter & Cheese sections
3. Egg tray
4. Adjustable door shelves
5. Bottle shelves
6. Adjustable front feet
7. Chiller
8. Chiller cover and glass
9. Movable shelves
10.Wine cellar
*OPTIONAL
1
*
*
2
3
4
*
5
7
8
9
10
6
9 / 22 EN
Refrigerator/User Manual
3 Installation
3.1. Appropriate
installation location
Contact an Authorized Service for the
installation of the product. In order to
prepare the product for use, refer the
information in the user manual and
ensure that electrical installation and
water installation are appropriate. If not,
call a qualified electrician and technician
to have any necessary arrangements
carried out.
B
WARNING:Manufacturer shall
not be held liable for damages
that may arise from procedures
carried out by unauthorized
persons.
B
WARNING:Product must
not be plugged in during
installation. Otherwise, there
is the risk of death or serious
injury!
A
WARNING:
If the door clearance of the
room where the product shall
be place is so tight to prevent
passing of the product, remove
the door of the room and pass
the product through the door
by turning it to its side; if this
does not work, contact the
authorized service.
• Placetheproductonanevenfloor
surface to prevent jolts.
• Installtheproductatleast30cm
away from heat sources such as hobs,
heater cores and stoves and at least 5
cm away from electrical ovens.
• Productmustnotbesubjectedto
direct sun light and kept in humid
places.
• Appropriateairventilationmustbe
provided around your product in order
to achieve an efficient operation. If the
product is to be placed in a recess in
the wall, pay attention to leave at least
5 cm distance with the ceiling and side
walls.
•
3.2. Installing the
plastic wedges
Plastic wedges supplied with the
product are used to create the distance
for the air circulation between the
product and the rear wall.
1. To install the wedges, remove the
screws on the product and use the
screws supplied together with the
wedges.
2. Insert the 2 plastic wedges onto the
rear ventilation cover as illustrated in
the figure.
10 / 22 EN
Refrigerator/User Manual
Installation
3.3. Adjusting the feet
If the product stands unbalanced after
installation, adjust the feet on the front
by rotating them to the right or left.
3.4. Electrical connection
A
WARNING: Do not make
connections via extension
cables or multi-plugs.
B
WARNING:Damaged
power cable must be
replaced by the Authorized
Service Agent.
C
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
• Our company shall not be liable
for any damages that will arise
when the product is used without
grounding and electrical connection
in accordance with the national
regulations.
• Power cable plug must be within easy
reach after installation.
• Connect your refrigerator to a
grounded outlet rated for a voltage
value of 220-240V /50 Hz. Outlet
shall have 10 to 16A fuse.
• Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
3.5. Changing the
illumination lamp
To change the Bulb/LED used for
illumination of your refrigerator, call your
Authorized Service.
The lamp(s) used in this appliance is not
suitable for household room illumination.
The intended purpose of this lamp is to
assist the user to place foodstuffs in
the refrigerator/freezer in a safe and
comfortable way.
3.6. Door Open Warning
(This feature is optional)
An audio warning signal will be given
when the door of your product is left
open for at least 1 minute. This warning
will be muted when the door is closed
or any of the display buttons (if any) are
pressed.
11 / 22 EN
Refrigerator/User Manual
Installation
3
2
1
6
4
9
7
10
11
14
12
16
16
13
15
8
5
45 °
12
180°
20
21
18
19
17
12 / 22 EN
Refrigerator/User Manual
4 Preparation
• For a freestanding appliance; ‘this
refrigerating appliance is not intended
to be used as a built-in appliance.
• Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not be
located under direct sunlight.
• The ambient temperature of the room
where you install your refrigerator
should at least be 5°C. Operating your
refrigerator under cooler conditions is
not recommended with regard to its
efficiency.
• Please make sure that the interior of
your refrigerator is cleaned thoroughly.
• If two refrigerators are to be installed
side by side, there should be at least 2
cm distance between them.
• When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
• The door should not be opened
frequently.
• It must be operated empty without any
food in it.
• Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
• Original packaging and foam
materials should be kept for future
transportations or moving.
• The baskets/drawers that are
provided with the chill compartment
must always be in use for low energy
consumption and for better storage
conditions.
• Food contact with the temperature
sensor in the freezer compartment may
increase energy consumption of the
appliance. Thus any contact with the
sensor(s) must be avoided.
• In some models, the instrument panel
automatically turns off 5 minutes
after the door has closed. It will be
reactivated when the door has opened
or pressed on any key.
• Due to temperature change as a result
of opening/closing the product door
during operation, condensation on
the door/body shelves and the glass
containers is normal.
13 / 22 EN
Refrigerator/User Manual
C
Figures in this user manual are schematic and may not match the product
exactly. If the subject parts are not included in the product you have
purchased, then those parts are valid for other models.
The operating temperature is
regulated by the temperature control.
0=System cooling is off.
1=Lowest cooling setting (Warmest
setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according to
the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended to
close the door again as soon as possible
after use.
The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonaltemperatures,
• Frequentopeningofthedoorand
leaving the door open for long periods,
• Foodputintotherefrigeratorwithout
cooling down to the room temperature,
• Thelocationoftherefrigeratorinthe
room (e.g. exposing to sunlight).
• Youmayadjustthevaryinginterior
temperature due to such reasons by
using the thermostat. Numbers around
the thermostat button indicates the
cooling degrees.
• Iftheambienttemperatureishigher
than 32°C, turn the thermostat button
to maximum position.
• Iftheambienttemperatureislower
than 25°C, turn the thermostat button
to minimum position.
5 Using your cooler/freezer
14 / 22 EN
Refrigerator/User Manual
Operating the product
5.1. Cooling
Food storage
The fridge compartment is for the short-
term storage of fresh food and drinks.
Store milk products in the intended
compartment in the cooler/freezer.
Bottles can be stored in the bottle
holder or in the bottle shelf of the door.
Raw meat is best kept in a polyethylene
bag in the compartment at the very
bottom of the cooler/freezer.
Allow hot foods and beverages to cool
to room temperature prior to placing
them in the cooler/freezer.
•Attention
Store concentrated alcohol only
standing upright and tightly closed.
•Attention
Do not store explosive substances or
containers with flammable propellant
gases (canned cream, spray cans etc.) in
the device. There is a danger of explosion.
5.2. Placing the food
Egg tray Egg
Fridge
compartment
shelves
Food in pans, covered
plates and closed
containers
Fridge
compartment door
shelves
Small and packaged
food or drinks (such
as milk, fruit juice and
beer)
Crisper Vegetables and fruits
Defrosting of the appliance
The appliance defrosts automatically.
15 / 22 EN
Refrigerator/User Manual
6 Maintenance and cleaning
Cleaning your fridge at regular intervals
will extend the service life of the
product.
B
WARNING:Unplug the
product before cleaning it.
• Never use gasoline, benzene or
similar substances for cleaning
purposes.
• Never use any sharp and abrasive
tools, soap, household cleaners,
detergent and wax polish for
cleaning.
• Dissolve one teaspoon of bi-
carbonate in half litre of water. Soak
a cloth with the solution and wrung
it thoroughly. Wipe the interior of the
refrigerator with this cloth and the
dry thoroughly.
• Make sure that no water enters the
lamp housing and other electrical
items.
• If you will not use the refrigerator
for a long period of time, unplug it,
remove all food inside, clean it and
leave the door ajar.
• Check regularly that the door gaskets
are clean. If not, clean them.
• To remove door and body shelves,
remove all of its contents.
• Remove the door shelves by pulling
them up. After cleaning, slide them
from top to bottom to install.
• Never use cleaning agents or water
that contain chlorine to clean the
outer surfaces and chromium coated
parts of the product. Chlorine causes
corrosion on such metal surfaces.
6.1. Avoiding bad odours
Materials that may cause odour
are not used in the production of
our refrigerators. However, due to
inappropriate food preserving conditions
and not cleaning the inner surface of the
refrigerator as required can bring forth
the problem of odour. Pay attention to
following to avoid this problem:
• Keeping the refrigerator clean is
important. Food residuals, stains, etc.
can cause odour. Therefore, clean
the refrigerator with bi-carbonate
dissolved in water every few months.
Never use detergents or soap.
• Keep the food in closed containers.
Microorganisms spreading out from
uncovered containers can cause
unpleasant odours.
• Never keep the food that have passed
best before dates and spoiled in the
refrigerator.
6.2. Protecting the
plastic surfaces
Do not put liquid oils or oil-cooked
meals in your refrigerator in unsealed
containers as they damage the plastic
surfaces of the refrigerator. If oil is
spilled or smeared onto the plastic
surfaces, clean and rinse the relevant
part of the surface at once with warm
water.
16 / 22 EN
Refrigerator/User Manual
7 Troubleshooting
Check this list before contacting the service. Doing so will save you time and money.
This list includes frequent complaints that are not related to faulty workmanship or
materials. Certain features mentioned herein may not apply to your product.
The refrigerator is not working.
• The power plug is not fully settled. >>> Plug it in to settle completely into the
socket.
• The fuse connected to the socket powering the product or the main fuse is
blown. >>> Check the fuses.
Condensation on the side wall of the cooler compartment (MULTI ZONE,
COOL, CONTROL and FLEXI ZONE).
• The environment is too cold. >> Do not install the product in environments with
temperatures below -5°C.
• The door is opened too frequently >>> Take care not to open the product’s
door too frequently.
• The environment is too humid. >>> Do not install the product in humid
environments.
• Foods containing liquids are kept in unsealed holders. >>> Keep the foods
containing liquids in sealed holders.
• The product’s door is left open. >>> Do not keep the product’s door open for
long periods.
• The thermostat is set to too low temperature. >>> Set the thermostat to
appropriate temperature.
Compressor is not working.
• In case of sudden power failure or pulling the power plug off and putting back
on, the gas pressure in the product’s cooling system is not balanced, which
triggers the compressor thermic safeguard. The product will restart after
approximately 6 minutes. If the product does not restart after this period,
contact the service.
• Defrosting is active. >>> This is normal for a fully-automatic defrosting
product. The defrosting is carried out periodically.
• The product is not plugged in. >>> Make sure the power cord is plugged in.
• The temperature setting is incorrect. >>> Select the appropriate temperature
setting.
• The power is out. >>> The product will continue to operate normally once the
power is restored.
The refrigerator's operating noise is increasing while in use.
• The product’s operating performance may vary depending on the ambient
temperature variations. This is normal and not a malfunction.
17 / 22 EN
Refrigerator/User Manual
Troubleshooting
The refrigerator runs too often or for too long.
• The new product may be larger than the previous one. Larger products will run
for longer periods.
• The room temperature may be high. >>> The product will normally run for long
periods in higher room temperature.
• The product may have been recently plugged in or a new food item is placed
inside. >>> The product will take longer to reach the set temperature when
recently plugged in or a new food item is placed inside. This is normal
• Large quantities of hot food may have been recently placed into the product.
>>> Do not place hot food into the product.
• The doors were opened frequently or kept open for long periods. >>> The
warm air moving inside will cause the product to run longer. Do not open the
doors too frequently.
• The freezer or cooler door may be ajar. >>> Check that the doors are fully
closed.
• The product may be set to temperature too low. >>> Set the temperature to a
higher degree and wait for the product to reach the adjusted temperature.
• The cooler or freezer door washer may be dirty, worn out, broken or not
properly settled. >>> Clean or replace the washer. Damaged / torn door
washer will cause the product to run for longer periods to preserve the current
temperature.
The freezer temperature is very low, but the cooler temperature is adequate.
• The freezer compartment temperature is set to a very low degree. >>> Set the
freezer compartment temperature to a higher degree and check again.
The cooler temperature is very low, but the freezer temperature is adequate.
• The cooler compartment temperature is set to a very low degree. >>> Set the
freezer compartment temperature to a higher degree and check again.
The food items kept in cooler compartment drawers are frozen.
• The cooler compartment temperature is set to a very low degree. >>> Set the
freezer compartment temperature to a higher degree and check again.
18 / 22 EN
Refrigerator/User Manual
Troubleshooting
The temperature in the cooler or the freezer is too high.
• The cooler compartment temperature is set to a very high degree. >>> Cooler
compartment temperature setting has an effect on the freezer compartment
temperature. Change the temperature of the cooler or freezer compartment
and wait until the temperature of the related compartments come to the
adequate level.
• The doors were opened frequently or kept open for long periods. >>> Do not
open the doors too frequently.
• The door may be ajar. >>> Fully close the door.
• The product may have been recently plugged in or a new food item is placed
inside. >>> This is normal. The product will take longer to reach the set
temperature when recently plugged in or a new food item is placed inside.
• Large quantities of hot food may have been recently placed into the product.
>>> Do not place hot food into the product.
Shaking or noise.
• The ground is not level or durable. >>> If the product is shaking when moved
slowly, adjust the stands to balance the product. Also make sure the ground is
sufficiently durable to bear the product.
• Any items placed on the product may cause noise. >>> Remove any items
placed on the product.
The product is making noise of liquid flowing, spraying etc.
• The product’s operating principles involve liquid and gas flows. >>> This is
normal and not a malfunction.
There is sound of wind blowing coming from the product.
• The product uses a fan for the cooling process. This is normal and not a
malfunction.
There is condensation on the product's internal walls.
• Hot or humid weather will increase icing and condensation. This is normal and
not a malfunction.
• The doors were opened frequently or kept open for long periods. >>> Do not
open the doors too frequently; if open, close the door.
• The door may be ajar. >>> Fully close the door.
There is condensation on the product's exterior or between the doors.
• The ambient weather may be humid, this is quite normal in humid weather. >>>
The condensation will dissipate when the humidity is reduced.
19 / 22 EN
Refrigerator/User Manual
Troubleshooting
The interior smells bad.
• The product is not cleaned regularly. >>> Clean the interior regularly using
sponge, warm water and carbonated water.
• Certain holders and packaging materials may cause odour. >>> Use holders and
packaging materials without free of odour.
• The foods were placed in unsealed holders. >>> Keep the foods in sealed
holders. Microorganisms may spread out of unsealed food items and cause
malodour.
• Remove any expired or spoilt foods from the product.
The door is not closing.
• Food packages may be blocking the door. >>> Relocate any items blocking the
doors.
• The product is not standing in full upright position on the ground. >>> Adjust
the stands to balance the product.
• The ground is not level or durable. >>> Make sure the ground is level and
sufficiently durable to bear the product.
The vegetable bin is jammed.
• The food items may be in contact with the upper section of the drawer. >>>
Reorganize the food items in the drawer.
A
WARNING:If the problem persists after following the instructions in this
section, contact your vendor or an Authorized Service. Do not try to repair
the product.
DISCLAIMER/WARNING
Some (simple) failures can be adequately
handled by the end-user without any
safety issue or unsafe use arising,
provided that they are carried out within
the limits and in accordance with the
following instructions (see the “Self-
Repair” section).
Therefore, unless otherwise authorized
in the “Self-Repair” section below,
repairs shall be addressed to registered
professional repairers in order to avoid
safety issues. A registered professional
repairer is a professional repairer that has
been granted access to the instructions
and spare parts list of this product by the
manufacturer according to the methods
described in legislative acts pursuant to
Directive 2009/125/EC.
However, only the service agent (i.e.
authorized professional repairers)
that you can reach through the phone
number given in the user manual/
warranty card or through your
authorized dealer may provide service
under the guarantee terms. Therefore,
please be advised that repairs by
professional repairers (who are not
authorized by Beko) shall void the
guarantee.
Self-Repair
Self-repair can be done by the end-user
with regard to the following spare parts:
door handles,door hinges, trays, baskets
and door gaskets (an updated list is also
available in support.beko.com as of 1st
March 2021).
Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the
instructions in the user manual for self-
repair or which are available in support.
beko.com. For your safety, unplug the
product before attempting any self-repair.
Repair and repair attempts by end-users
for parts not included in such list and/
or not following the instructions in the
user manuals for self-repair or which are
available in support.beko.com, might give
raise to safety issues not attributable to
Beko, and will void the warranty of the
product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned
list of spare parts, contacting in such
cases authorized professional repairers
or registered professional repairers. On
the contrary, such attempts by end-users
may cause safety issues and damage
the product and subsequently cause fire,
flood, electrocution and serious personal
injury to occur.
By way of example, but not limited to,
the following repairs must be addressed
to authorized professional repairers
or registered professional repairers:
compressor, cooling circuit, main
board,inverter board, display board, etc.
The manufacturer/seller cannot be held
liable in any case where end-users do not
comply with the above.
The spare part availability of the refrigerator
that you purchased is 10 years.
During this period, original spare parts will
be available to operate the refrigerator
properly
The minimum duration of guarantee of
the refrigerator that you purchased is 24
months.
This product is equipped with a lighting
source of the "G" energy class.
The lighting source in this product
shall only be replaced by professional
repairers.
BLOMBERG UK AND IRELAND STANDARD MANUFACTURER
GUARANTEE TERMS AND CONDITIONS
Your new Blomberg product is guaranteed
against faulty materials, defective compon-
ents or manufacturing defects.
Thestandardguaranteestartsfromthedateoforiginalpurchaseoftheproduct,andlastsforaperiodof
thirtysix(36)monthsunlessBekoplc(the“Manufacturer”)agreestoextendtheguaranteefortheproduct
inwriting.
If you have any questions about the guaran-
tee on your product (including how long it is
valid), please contact your retailer or our
contact centre on 03332079870 (UK and
Northern Ireland) or 016910160 (Republic
of Ireland)
This guarantee does not in any way dimin-
ish or affect your statutory rights in connec-
tion with the product. This guarantee is in
addition to your statutory rights as a con-
sumer. If you have any questions about
these rights, please contact the retailer
from which you purchased the product. In
certain circumstances,it is possible that
your statutory rights may offer additional or
higher levels of protection than those
offered under the terms of this guarantee.
What is covered by this guarantee?
• Repairs to the product required as a res-
ult of faulty materials, defective compon-
ents or manufacturing defects.
• Functional replacement parts to repair a
product.
• The costs of a Blomberg Approved Engin-
eer to carry out the repair.
What is not covered?
•T ransit and delivery damage.
• Cabinet or appearance parts, including
but not limited to control knobs, flaps
and handles.
• Accessories and/or consumable items
including but not limited to ice
light bulbs.
– Repairs necessary as a direct or indir-
ect result of:
– Accidental damage, misuse or abuse
of a product.
– An attempted repair of a product by
anyone other than a Blomberg Ap-
proved Engineer (the “Engineer”).
–I nstallation or use of a product where
such installation or use fails to meet
the requirements contained in this
guarantee or the User Instructions
Booklet.
• Repairs to a product operated at any time
on commercial or non-residential house-
hold premises (unless we have previously
agreed to the installation environment).
This guarantee is limited to the cost of re-
pairing the product. To the extent permitted
by law, the Manufacturer does not accept
loss incurred in connection with the failure
of any product to operate in accordance
loss includes but is not limited to loss
arising from:
•T ime taken off work.
• Damaged food, clothing or other items.
•M eals taken at restaurants or from
takeaways.
• General compensation for inconveni-
ence.
Important Notes
1. Your product is designed and built for
domestic household use only.
2. The guarantee will automatically be
void if the product is installed or is
used in commercial or non-residential
domestic household premises, unless
we have previously agreed to the in-
stallation environment.
3. The product must be correctly in-
stalled, located and operated in accord-
ance withnthe instructions contained in
the User Instructions Booklet provided
with your product.
Electrical Domestic Appliance Installer
is recommended for all Washing Ma-
chines, Dishwashers and Electric Cook-
ers (as incorrect installation may result
in you having to pay for the cost of re-
pairing the product).
5. Gas Cookers must be professionally in-
stalled by a Gas Safe (or Gas Networks
Ireland for Republic of Ireland) re-
gistered gas installer.
6. This guarantee is given in respect of
products purchased and used within
the United Kingdom and the Republic
of Ireland.
7. This guarantee is effective from the ini-
tial date of purchase of a new product
from an authorised retailer and will be
void if the product is resold.
8. This guarantee does not apply to
graded sales (where the product is pur-
chased as a “second”).
9. Possession of a copy of these terms
and conditions does not necessarily
this guarantee. If you have any ques-
tions, please call our Call Centre on the
number set out above.
10. The Manufacturer reserves the right to
terminate the guarantee if its staff or
representatives are subjected to phys-
ical or verbal abuse in the course of
carrying out their duties.
11. Optional extras, where available (i.e.
extendable feet) are supplied on a
chargeable basis only.
Does Blomberg offer replacements?
This is a repair-only guarantee. On occa-
sion, the Manufacturer may at its sole dis-
cretion, replace your product with a new
product instead of carrying out a repair.
Where a replacement is offered, this would
normally be an identical model but when
this is not possible, a model of similar spe-
The Manufacturer will cover the costs and
arrange for the delivery of the new product
and for the return of the old product. Any
costs related to disconnecting the faulty
product and installing the replacement
product will not be borne by the Manufac-
turer unless previously agreed to in writing.
The original guarantee will continue to ap-
ply to the replacement product; the new
product will not come with a new guaran-
tee.
When will the repair take place?
Our Engineers work Monday to Friday
9.00am to 5.00pm. Appointments outside
these hours may be possible at the sole
discretion of the Manufacturer but cannot
be guaranteed. Whilst our Engineers will en-
deavour to minimize inconvenience and to
ments, this cannot be guaranteed. We will
not be liable for delays or if it is unable to
carry out a repair because a convenient ap-
pointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence
to the Engineer that your product is covered
by this guarantee with a proof of purchase.
The Manufacturer reserves the right to
charge for the reasonable cost of any ser-
vice call if:
• You cannot provide evidence that your
product is covered by this guarantee.
•W here a service call has been made and
with your product.
• That your product has not been installed
or operated in accordance with the User
Instructions Booklet.
• That the fault was caused by something
other than faulty materials, defective
components or manufacturing defects.
• For missed appointments.
Payment of these costs are due immedi-
ately upon the Engineer providing you
with an invoice. The Manufacturer reserves
the right to terminate the guarantee if
you fail to pay the costs for the service call
in a timely manner.
If you are a resident of the United Kingdom,
this guarantee will be governed by
English law and subject to the English
Courts, save where you live in another
part of the United Kingdom, in which case
the law and courts of that location will
apply.
If you are resident in the Republic of Ire-
land, this guarantee will be governed by
Irish law and the Irish courts will have juris-
diction.
This guarantee is provided by Beko plc.
Beko House, 1 Greenhill Crescent,
Watford, Hertfordshire. WD18 8QU.
Beko plc is registered in England and Wales
with company registration number
02415578.
HOW TO OBTAIN SERVICE FOR YOUR
APPLIANCE
Please keep your purchase receipt or other
proof of purchase details in a safe
place; you will need to have this document-
ation available should the product
require attention under guarantee.
Please take a few moments to complete
the details below, as you will need this
information when you call us, or to use our
online services. When you call us you
may be required to input your serial number
into your telephone keypad. For help
please visit Blomberguk.com/support/
• • The product model number is printed on
the Operating Instruction Booklet / User
guide
• • The product model and serial number is
appliance.
• • The Retailer (Purchased from) and Date
of purchase will be printed on your pur-
chase receipt or other proof of purchase
paperwork
Recording of these details alone will not
count as proof of purchase. A valid
proof of purchase is required for requesting
service under guarantee.
Modelnumber Serialnumber Purchasedfrom Dateofpurchase
For service under guarantee or for
product advice please call our Contact
centre
Before requesting service please check the
troubleshooting guide in the Operating In-
structions booklet, as a charge may be
levied where no fault is found, and even
though your product may still be under
guarantee.
After arranging service the area around the
product must be easily accessible to the
Engineer, without the need for cabinets or
furniture to be removed or moved.
It is your responsibility to ensure our Engin-
eers have a clean and safe environment to
carry out any repairs.
Please have your Model number and Serial
number available when you call us,as you
may be required to input your serial number
into your telephone keypad during your call.
UK Mainland & Northern Ireland:
0333 207 9870
Landline or mobile calls to 0333 numbers
cost no more than calls to geographic num-
bers 01 or 02, and are charged at the basic
rate. Calls from landlines and mobiles are
included in free call packages but please
check with your telephone service provider
for exact call charges.
Republic of Ireland:
01 691 0160
Serviceoncethemanufacturersguaran-
teehasexpired
If you have purchased an extended guaran-
tee please refer to the instructions con-
tained within the extended guarantee
agreement document, otherwise please call
us using the appropriate number above,
where service can be obtained at a charge.
taining service please call us on
03332079870 or 016910160
Contact us though our website
Send us a secure message through our on-
line contact us form. Please visit our web-
site, click Contact Us and choose a product
support topic from the list of options. Com-
plete the required details and click send
message.
Product registrations
For UK and Republic of Ireland product re-
gistrations please visit blomberguk.com/re-
gister
