Wireless USB Adapter
Quick Installation Guide
Images are for demonstration only.
1 Connect to a Computer
7106511083 REV1.2.0©2024 TP-Link
2 Install Driver
a. Go to My Computer or This PC.
b. Double click the TP-Link CD-ROM then
run SetupInstall.exe to install driver.
Notes:
• If you cannot nd the setup program, please download
the driver at www.tp-link.com/support.
• If an unknown publisher message pops up, select Ye s
to continue.
• If Windows User Account Control requires admin
credentials, type user name and password of your
Windows administrator account.
SetupInstall.exe
For technical support, replacement services,
user guides, and other information, please
visit https://www.tp-link.com/support, or
simply scan the QR code.
3 Join a Wireless Network
b. Select your Wi-Fi network, click
Connect and enter the password when
prompted.
Network 6
Connected
Network settings
Connect automatically
Connect
√
TP-Link_XXXX
Troubleshooting
If you have problems during the installation, please
refer to the following online FAQs.
T1. Can’t nd the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t nd or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
a. Click the network icon on the taskbar
(the icon might look like one of these:
, , , or ).
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU, 2011
/65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at
https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment
Regulations 2017.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
· Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
· Do not use the device where wireless devices are not allowed.
· Keep the device away from water, re, humidity or hot environments.
· This product can be powered only by power supplies that comply with
Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1.
Safety Information
Support
